0
What else can I help you with?
What may be wrong if one day one cylinder is not firing than the next day it works and another cylinder is not firing?
Normally, I would look first to the fuel metering system for the cause of this problem.
You have a 2001 Ford Mustang 38 V6 that is not firing on one cylinder even after you changed the spark plugs Any other Ideas about what would cause this?
Burnt valve, blown head gasket, bad plug wire.
What could cause the number 4 cylinder to stop firing in a 1992 Chevy Cavalier?
A fouled or worn out plug, a bad or loose plug wire. There is also a chance that internal engine damage (burnt valve), or even an injector that has quit working.
Can coil pack cause cylinder number one to misfire?
what are the possible causes of misfire on number one cylinder in a dodge 2003 ram 4.7 liter engine
Why is the firing order different between a 351 windsor and a 302 windsor?
early for 289 302 windsor firing order was changed to the later 351 windsor firing order to smooth out the firing of cylinders. The early 289 firing order made cams sound lumpy and could cause extra stress on crankshafts when engines were used in motorsport at high rpm
What would cause my 91 gmc 350 to back fire through carb just recently changed head gaskets?
Check the spark plug wires and make sure they are on the right cylinder. The firing order is 18436572, counterclockwise on the cap. If that is correct, then the distributer could be installed 180 degrees off.
What would cause a miss fire in the number 2 cylinder on a 2002 Pontiac Sun fire?
new plug needed... old one black and wet? not firing...fouled out.. take old plug to parts store get same numbers on new one
What could cause a clutch pedal on a 1992 Toyota celica to stick to the floorboard with no loss of fluid and I have already changed the slave cylinder and bled it several times?
If you've changed the slave cylinder and bled it several times, the next step would be to check the MASTER cylinder and if that doesn't work then your clutch is burned out.
What would cause number cylinder 3 to shatter on a BMW?
Throwing a rod with Over Revving and overheating or foreign object inside the cylinder
What would cause a lope in the firing order of a 99 gmc Yukon with plugs and wires just changed?
If it ran good before, it's got to be minor.
Wiil the crank shaft sensor cause the engine to buck in a 2000 kia sephia?
Yes, a crank sensor is one of the major sensors used to control engine timing and cylinder firing.
What will cause a muffler to glow red immediatly after starting the engine on an 18 hp Briggs and stratton?
One of the cylinders is probably not firing. Try pulling a each plug wire alternately while the engine is running. One of them probably won't make any difference and the other will probably kill the engine. The one that does not make any difference is the one that is causing the trouble. You will have to find out why it is not firing. What is happening is the cylinder that is not firing is letting the gas flow through the cylinder and into the exhaust where it is igniting in the muffler.
