The sensor is threaded into the head to the left of the thermostat housing and has a single wire connector on it.
Thanks
Malcolm
The 2003 Mazda engine coolant temperature sensor is located on the front of the engine, above the thermostat housing. The sensor will have to wires leading to it.
The coolant temperature sensor should be located near the upper coolant hose where it enters the engine block, just a few inches nearer to the windshield. It is usually a gold color.
There is a coolant temperature sensor and a temperature gauge sensor. the coolant sensor is located on driver side of the cylinder head. screws right into it, and the temperature gauge sensor is on the front side of the cylinder head right under the distributor. hope this helps
There is a coolant temperature sensor and a temperature gauge sensor. the coolant sensor is located on driver side of the cylinder head. screws right into it, and the temperature gauge sensor is on the front side of the cylinder head right under the distributor. hope this helps
On a 2001 Mazda Miata, the temperature sensor, also known as the coolant temperature sensor, is located on the engine block. Specifically, it is typically found near the thermostat housing, on the cylinder head. This sensor monitors the coolant temperature and sends the information to the engine control unit (ECU). If you're looking for it, you may need to access it from the top of the engine bay.
On a 2006 Mazda Miata, the engine coolant temperature sensor is located on the engine block, specifically near the thermostat housing. It is typically positioned on the cylinder head or intake manifold, making it accessible for wiring connections. You may need to remove some components for better visibility when servicing or replacing the sensor.
At the back of the engine on the coolant outlet that goes to the heater hoses on the firewall.
COOLANT sensor on mazda 6 where is it
Coolant temperature sensor is locatedat the front of the intake manifold near the upper radiator hose.
The coolant temp sensor for the gauge is located near the front passenger side of the engine near the thermostat. It will be pointing slightly down and to the front of the truck. Will have a single yellow wire attached. The coolant temperature sensor for the ECU is bolted into the intake manifold in front of the carb. It will have a green 2 pin molded body. A 3rd sensor is located in the bottom of the radiator, this turns on the Carburetor PTC heater when the coolant temperature is below 60 deg F. Kyrasis6 Owner of Mazdatruckin.com
no sensor only a thermostat
under the termostat housing.