wat are the color or the pioneer wires at the back
Not to be rude but that is a BIG no!! You would think that it would be the easiest way but its not. With most pioneer CD receivers they come with a quick disconnect wiring harness. Not only that the colors on the wires are different. Granted they still have the same red, and black wires which are the ignition wire and the ground. the best solution to this would be to compare both manuals and compare the wires before you install the new system.
Red-Ignition Yellow-Battery (memory) Blue-Remote(antenna) Black-Ground Green Wires-Left Rear Purple Wires-Right Rear White Wires-Left Front Grey Wires-Right Front http://forum.ecoustics.com/bbs/messages/4/251407.gif
no
Not missing any wires. The red wire came out the harness and there's three open slots.
You can, but it's hard because you may short wires because the pins on the wiring harness socket is small and easy to short out on other pins if the wires fray.
Almost any car stero unless it's swiss and then you need a few more wires.
what did a pioneer carpenter do in the pioneer time
The Pioneer Portable GPS is a navigation system that uses a satellite signal to pinpoint your location and give you directions to any given place that you enter on the system. The device includes power and speaker wires as well as a carrying case. Amazon.com sells this product too. You can see the item at http://www.amazon.com/Pioneer-AVIC-S2-Portable-Navigation-Display/dp/B000PXNR1G.
I lost the wiring colors codes but it's fairly easy. The key is to find out what the color codes are for the vehicle your connecting the radio to. After that, yellow and red wires on the 2500 are your positive and negative, and the remaining wires are Speaker wires - FRONT Left, FRONT Right, REAR Left, REAR right. Once your power wires are connected just connect speakers to each set of matching color wires and mark which speaker comes on.
I lost the wiring colors codes but it's fairly easy. The key is to find out what the color codes are for the vehicle your connecting the radio to. After that, yellow and red wires on the 2500 are your positive and negative, and the remaining wires are Speaker wires - FRONT Left, FRONT Right, REAR Left, REAR right. Once your power wires are connected just connect speakers to each set of matching color wires and mark which speaker comes on.
Just use the harness for the old player. It must have all required wires including the battery wire and the ignition wire.