0
Try this
http://i96.Photobucket.com/albums/l199/luvnshay/radiowiring.gif
What else can I help you with?
What are the wiring codes for a Ford Probe?
If you mean for the stero, check at www.installdr.com.
How much trouble is it to change a manual ford probe window to an electric one?
It really depends if it already has the wiring harness installed. Some models have the wiring harness already because it was a factory option. If the wiring is there, then it is a piece of cake. If the wiring isn't already there then you are going to have fun turning into a electrician for a day and making it work anyways. Also make sure you get the correct year for the window motor since the door was changed slightly through the years of the Probe.
What are the color codes for a 89 ford probe's stereo?
== == Try installdr.com. They have step by step and wiring diagrams for all most all vehicles. I know they have the probe. totally free
How do you remove the wiring harness from the rear of the alternator on a Ford probe 1989?
To remove the wiring harness from the rear of the alternator on a 1989 Ford Probe, first disconnect the negative battery terminal to prevent any electrical issues. Then, locate the wiring harness plug on the back of the alternator, press the release tab, and gently pull the connector away from the alternator. If necessary, you may need to wiggle it slightly to free it from any tight spots. Once disconnected, you can proceed with any further repairs or alternator removal.
How do you repair a wiring harness for a 1993 kenworth?
Find the short or break and repair it with butt connectors. The best tool for diagnosis and locating these faults is the Power Probe. Otherwise, you'll have to unwrap wiring and find it manually.
How do you test a trailer harness with a multimeter?
To test a trailer harness with a multimeter, first ensure the vehicle is connected to the trailer and that the vehicle's lights are on. Set the multimeter to measure DC voltage and probe the appropriate pins on the trailer connector based on the wiring diagram for the harness. Activate the turn signals, brakes, and running lights one at a time to check for the correct voltage at each pin. If the readings match the expected values, the harness is functioning properly; if not, there may be a fault in the harness or vehicle wiring.
Stereo wiring for Ford Probe 1995?
This site gave me some good information - all the wires seemed to match my '95 probe. http://www.aus-cartalk.com/probe/audio.htm
Can you swap a 4-cylinder engine for a 6-cylinder in a 1995 Ford Probe?
Yes, But there is A lot of work and parts to change too. Tranny wiring harness most accessories motor and trans mounts computer You pretty much need to take everything out from under the hood and the computer and wiring and change it from one car to the other.
Where can you find a wiring diagram for Ford Probe CD changer?
Try looking for a Chiltons manual for the correct year of your probe, I own one for my 92 3.0L v6 and it's loaded with every wiring diagram you need for the vehicle.
Will a Ford Probe turbo motor fit in a 95 Ford Probe?
Yes, a Ford Probe turbo motor can fit into a 1995 Ford Probe, as both vehicles share the same platform and similar engine bay dimensions. However, additional modifications may be necessary for proper installation, including adjustments to the wiring harness, fuel system, and exhaust components. It's also important to ensure compatibility with the transmission and drivetrain. Overall, while feasible, the swap requires careful planning and mechanical expertise.
How do you install a CD player on 1990 Ford Probe?
To install a CD player in a 1990 Ford Probe, first, remove the existing radio by using a trim removal tool to detach the dashboard panel and unscrew the radio from its mounting. Next, connect the wiring harness adapter to the CD player's harness to ensure compatibility. Slide the CD player into the mounting bracket, secure it with screws, and reattach the dashboard panel. Finally, test the player to confirm proper operation before finishing up.
Will a 89 Ford Probe motor interchange with a 93 Ford Probe?
No, they are completely different motors with different wiring harnesses, motor mount positions and transmissions.
