0
What else can I help you with?
How many spark plugs on Mitsubishi Lancer?
Four.
What causes a 2002 Mitsubishi lancer to misfire?
Last summer, the cylindars started to misfire on my 2002 lancer. Once the spark plugs were changed, I haven't had any more issues.
How do you change spark leads on Mitsubishi lancer 1993 model?
no
How many spark plugs is on a 2008 Mitsubishi Lancer?
The 2008 Lancer uses a 4 cylinder engine, therefore it uses 4 spark plugs.
What is the spark plug gap on a 2002 Mitsubishi Lancer?
02 lancer gaplook under the hood of your lancer for the specs, but the gap is .039-.042. With platinum plugs, a spark plug gap isn't necessary.
What is the spark plug gap on a Mitsubishi lancer 1998 coup gli?
The spark plug gap on a 1998 Mitsubishi Lancer Coupe Gil should be set between .039 and .043 inches. This gap specification was set by the manufacturer.
What is the spark plug gap on 2004 Mitsubishi Lancer 2.4 engine?
The spark plug gap on 2004 Mitsubishi Lancer 2.4 engine should be set between .7 and .8 mm. A new spark plug may be purchased for this vehicle at any auto parts retailer.
Spark plug gapping for 2004 Mitsubishi lancer es?
it should say on the sticker under the hood
Where are the spark plugs on a 1998 4G92 Mitsubishi Lancer engine?
Underneath the plastic cover that has MIVEC written on it.
How long should spark pulg be used in Mitsubishi lancer?
Most spark plugs are good up to 100,000 miles, regardless of manufacturer or engine. If one fails to light prematurely and causes a cylinder misfire, it'll cause a CEL.
What spark plug does Mitsubishi lancer uses?
The Mitsubishi Lancer typically uses NGK or Denso spark plugs, with the specific part number depending on the engine variant and model year. For example, many models with the 2.0L engine use NGK IFR6A-11 or Denso K20PR-U11 plugs. Always consult the owner's manual or a parts specialist to confirm the correct spark plug for your specific Lancer model.
What is the spark plug gap setting on a 1996 Mitzi lancer MR 1600 mivec?
The spark plug gap for a 1996 Mitsubishi Lancer MR 1600 mivec should be set between 1.0 and 1.1 mm. A new spark plug will not need to be gapped as they are gapped at the factory.
