The coolant drain on a 2003 Pontiac Grand Am is located on the bottom of the radiator on the right side. It allows coolant to be quickly removed during maintenance and flushes.
The engine coolant drain plug on a Mitsubishi V6 engine is located on the bottom of the radiator. This allows for coolant to be quickly and easily drained.
The radiator drain plug on a Chrysler Sebring is located on the bottom, left side of the radiator. It allows for coolant to be quickly drain from the system.
my drain is brok and i casn not get it out how can i drain the coolant?
To drain the coolant on a Mazda 626, locate the drain plug on the bottom of the radiator. Remove the plug and drain the coolant into a pan.
Assuming there is coolant in the engine the most likely cause is a build up of sediment behind the coolant drain or in the coolant drain tap itself.
To drain the coolant from a 2002 VT750DC Shadow Spirit, first ensure the engine is cool. Locate the coolant drain bolt at the bottom of the water pump or the radiator, depending on your configuration. Place a container underneath to catch the coolant, then remove the drain bolt and allow the coolant to flow out completely. After draining, reinsert the drain bolt and refill the system with fresh coolant.
To drain the coolant from your Polaris ATV, first ensure the engine is cool and locate the drain plug, typically found at the bottom of the radiator or engine block. Place a drain pan underneath to catch the coolant, then remove the drain plug and allow the coolant to fully drain out. After draining, replace the drain plug securely and refill with the appropriate coolant mixture as specified in your owner's manual. Always dispose of the old coolant responsibly, as it is toxic to pets and wildlife.
You drain coolant from the radiator. but according to the book ther are two plugs on the engine block that need to drain the coolant from.
The radiator drain plug on a 2004 Chevy Venture is located at the bottom, left side of the radiator. It allows for the coolant to be quickly drained during maintenance.
To drain the coolant on a 2009 Range Rover with a turbo, first ensure the engine is cool, then locate the coolant drain plug, usually found at the bottom of the radiator. Position a drain pan underneath, remove the drain plug, and allow the coolant to flow out completely. After draining, replace the drain plug securely and refill the system with the appropriate coolant mixture. Always dispose of the old coolant properly and check for leaks after refilling.
there is a drain plug/petcock in one of the corners on the engine side of the radiator. you just have to open that and the coolant will drain out. remember coolant is hazardous to pets as well as the environment.