0
What else can I help you with?
What cause the luminousity of the flame?
The color of the flame depends on the temperature, fuel nature, composition of particles in the flame, oxygen concentration.
Why does blowing out a candle work to extinguish the flame?
Blowing out a candle extinguishes the flame because it disrupts the balance of oxygen needed for combustion. When you blow on the flame, you remove the oxygen surrounding the wick, which is necessary for the flame to continue burning. This sudden lack of oxygen causes the flame to go out.
What causes a burner flame to burn at the base of the burner?
because it's hot
What will melt in a candle flame?
Wax is the primary component that melts in a candle flame, as it is the fuel that provides the energy for the flame to burn. The heat of the flame causes the wax to melt, which then travels up the wick through capillary action and vaporizes to produce light and heat.
Why does a flame bend toward the wind?
A flame bends toward the wind because the flow of air carries the heat and combustion products away, creating an area of lower pressure on the windward side of the flame. This pressure difference causes the flame to lean in the direction of the wind.
What color is a gas flame that is starved of oxygen?
A gas flame that is starved of oxygen will typically appear yellow or orange in color due to incomplete combustion. This lack of oxygen causes the flame to produce soot and emit more visible light, giving it a distinct hue.
What causes a flame roll out?
A flame roll out can be caused by a disruption in the airflow or fuel mixture within a gas appliance. This can lead to the flame being pushed out of the combustion chamber instead of burning inside it. Common causes include blocked vents or flues, improper installation, or a malfunctioning gas valve. It is important to address flame roll out promptly as it can pose a safety hazard due to the risk of fire or carbon monoxide poisoning.
What causes a Flame?
A flame is caused by the chemical reaction between a fuel source, heat, and oxygen. When these components come together in the right proportions, the fuel breaks down into combustible gases that produce light and heat, creating a flame.
What causes the Bunsen burner flame to be noisy?
There are actually two flames that appear one is yellow & other is blue. And the blue flame makes more noise than the yellow.I think it is the sound of air rushing through the vents to get to the flame. The reason you get the yellow flame is that the gas is not burning completely. It is when you open up the vents that the flame is adjusted to blue.
What causes a pink flame?
A pink flame is often caused by the presence of potassium salts in a burning substance. When potassium is heated, it emits a pink or purple color in the flame. This can be seen in certain fireworks, where potassium compounds are used to create colorful effects.
What color flame do you get when you burn tungsten?
When tungsten is burned, it produces a bright white flame. This is due to the high temperature required to ignite tungsten, which causes it to emit a white light.
What causes sparking at the brushes in amotor?
It has static charges. Or it may be combustible, that's why it spark and went to flame.
