answersLogoWhite

0

There are actually two flames that appear one is yellow & other is blue.

And the blue flame makes more noise than the yellow.I think it is the sound of air rushing through the vents to get to the flame.

The reason you get the yellow flame is that the gas is not burning completely. It is when you open up the vents that the flame is adjusted to blue.

User Avatar

Wiki User

10y ago

What else can I help you with?

Related Questions

What causes a Bunsen burner to be noisy?

A Bunsen burner can be noisy if the air and gas mixture is not properly adjusted. This can lead to uneven combustion, causing fluctuations in the flame intensity and resulting in noise. Adjusting the air and gas flow to achieve a steady blue flame can reduce the noise.


What causes a Bunsen burner to make noise?

If you let hydrogen gas near the flame it will pop. The way we got hydrogen gas is by adding hydrochloric acid to magnesium powder and putting our thumb over the top of the test tube trapping the hydrogen gas then releasing it near the flame of the Bunsen burner.


Why do you need to know witch flame is nosier on a Bunsen burner?

Knowing which flame is noisier on a Bunsen burner can indicate potential safety concerns. A noisy flame can be a sign of improper gas flow or air mixture, which could lead to incomplete combustion and the production of harmful byproducts like carbon monoxide. Monitoring the noise level of the flame can help maintain safe and efficient operations in a laboratory setting.


What is the amount of air mixing with gas on a Bunsen burner safety?

The amount of air mixing with gas on a Bunsen burner should be regulated to achieve the desired flame. Too little air can result in a yellow, sooty flame, while too much air can make the flame noisy and inefficient. It is recommended to adjust the air inlet to create a blue, non-luminous flame for safe and effective burning.


Why is your Bunsen burner so noisy?

The "air holes, or the gas is too high.


What would happen if you mixed gas and air in a Bunsen burner?

If you mix too much gas with air in a Bunsen burner, it can result in a noisy or unsteady flame that may produce black soot due to incomplete combustion. This can also pose a safety risk as too much gas can lead to a higher flame temperature and potential fire hazard. Adjusting the gas and air mixture properly is important for producing a clean and efficient flame for heating purposes.


How would you adjust a burner which is noisy with a tendency to blow itself out?

To adjust a burner that is noisy and tends to blow itself out, first ensure the burner is clean and free of debris. Next, check the air and gas supply to make sure they are at the correct levels. Adjust the air-to-fuel ratio if necessary, and consider installing a flame stabilizer or shield to help prevent the flame from being extinguished.


What flames are bunsenn?

Right you need to know the 3 flames on a bunsen burner:♥ Safety Flame (Orange and visible)♥ Blue Flame (Says it in the name-- its blue)♥ Roaring flame (Noisy and invisible)Thanks for readingSparkleeET xx


In luminous flame the flame is produce when the air hole is open or close?

A bunsen burner (as used in a science lab or science classroom) will burn quietly, and a flickery yellow (like a wax candle) if the air hole is closed, or closed too much. If the air holes is opened, the flame will turn bluish and become noisy and hotter as more air mixes with the gas.


What does a blue flame mean on a gas furnace?

Sharp, noisy blue flame=too much air Blue flame with defined inner lighter blue cone= just right Soft blue flame with yellow tips=not enough air, or using LP gas Most times can be adjusted with the primary air shutter on the burner tube, being careful to check for good ignition after adjustment. Caution: a yellow flame can carbon/clog up the heat exchanger eventually.


How would you adjust a burner which is noisy with tendency to blow itself?

First, check for any blockages in the burner that may be causing the noise and disruption. Next, ensure that the burner is receiving the correct air-to-fuel ratio for proper combustion. Lastly, adjust the burner to a lower setting to reduce the likelihood of it blowing itself out. If the issue persists, consider contacting a professional for further assistance.


What causes Noisy tappets on 2006 Honda diesel crv?

Diesels are normally noisy anyway - are you sure it your valve tappets? If so, they could be out of adjustment. Take it to a shop and have them checked and adjusted.