In a Peugeot 206, the rear speaker wires are typically color-coded as follows: the positive wire is usually blue and the negative wire is often brown. However, it's important to check the specific wiring diagram for your model year, as colors can vary slightly. Always verify connections before making any modifications to ensure proper functionality.
On my Pug 206 I had speaker terminations for rear speakers but no rear speakers fitted. I simply chocolate blocked each one to extend the speaker wires to the boot of the car. Even if you have rear speakers fitted it should still be possible. I've got a 3dr car, so it was fairly easy. If you have a 5dr you may have to try and remove fittiings to run the wires properly
front 16.5cm or 165mm rear 13cm or 130mm and the mirrror tweeters are 22.5mm or 2.25cm.
EZR
In a 1998 Peugeot 206, the typical radio wiring colors are as follows: the yellow wire is usually for constant power (battery), the red wire is for switched power (ignition), the black wire is for ground, and the speaker wires can vary in color (commonly grey and grey/black for the front speakers, and green and green/black for the rear speakers). Always consult a wiring diagram specific to your model for accuracy, as variations may exist.
No matter what colour an adult human is, their body contains 206 bones.
14 Inch
200Nm
32psi front and rear
they are black in colour and have a multiplug connection on the side of them
30/32 mm
There's 2 answers to this question! ...and this is because Peugeot redesigned the wipers on 206's built around 2001, so...On older 206's (approx 1998 - 2000)Drivers side* = 19" (480mm)Passenger side* = 26" (660mm)*Note applies to UK spec models onlyOn newer 206's (approx 2001 - 2005)Both drivers & passenger = 22" (555mm)Rear wiper blades are 14" (355mm) however generic blades won't fit on the rear due to the arm design, so you will need to order rear blades specifically for the 206.
it's the box attached to the windscreen behind the rear view mirror