0
What do you mean by "stuck". I assume the wiper switch is in the turn signal lever? It could mean that the wiper motor assembly is faulty. The motor assembly has a position sensor that keeps the motor running until the wipers come to rest at the appropriate position. If that sensor has failed you will need to replace the wiper motor.
What else can I help you with?
How do you turn on the wipers on a 2000 Saturn L series?
The turn signal switch (left side of the steering column) includes a couple controls for the wiper. Twist the lever to turn the wipers on. Twist the part of the lever with the paddle to dispense windshield washing fluid. Twist the ring to set the wiper delay.
Wipers are automatic on a caddy cts they wont cut off even when its not raining?
The windshield wipers are not automatic... the lever that controls the wipers have three positions and you will have to pull the lever down to the off position. The position below off is for mist. If you pull the lever to that position and let it go, the lever will go back to the off position.
How do you fix the windshield wipers after you have replaced the switch and wiper motor but the windshield wipers still do not work on 1995 Thunderbird LX 46?
My wipers would only work on high. we replaced the signal lever which works the wipers too. i did get my mechanic to do it because it was'nt as easy as the parts store said it was. try replaceing the wiper pulse relay board under driver side dashboard
How do you turn off the rear wipers on a ford transit?
The control lever for wipers on the Transit is able to move up and down (for operating the front wipers), but also can be moved towards and away from the driver to control the rear wipers. Push the wiper lever away from you (while seated in the driver seat) to turn off rear wipers.
Why would the front wipers on your 1999 Mountaineer come on and then cut off without your touching the controls?
turn signal lever connection loose ... mine was... This was part of a recall back in 2000 or 2001.
What does the turn signal switch control on an 2002 explorer sport?
The multi-function switch inside the steering column has the turn signal lever and hazard lights button extending outside of the steering column it operates - turn signals - flash to pass - high beam headlights - windshield wipers ( on/off ) and intermittent speed settings for the wipers - windshield washer fluid squirter button
How do you turn on the rear windsheld wipers on your 03 Hyundai tiburon?
it is on the same lever you turn your front wipers on with but you twist the the last inch of it
How do you get your brights to work on an 1987 caprice classic?
pull up on the turn signal lever,check the bright lights relay,check the bulbs & wiring. etc,etc,etc
What kind of lever is a railway signal?
first
What kind of Lever a Railway signal?
first
Why do your windshield wipers work if you push the lever down but not when you turn on?
If the windshield wipers work when pushing the lever down but not when they are turned on all the time, the problem could be in the wiper motor relay switch. There are two different relay switches for the windshield wipers, so that if the one fails a person can still clear the windshield manually.
What does the multi switch in a 1996 ford Crown Victoria do?
Your multi function switch is mounted inside your steering column cover The turn signal lever is part of the multi function switch , as is the hazard flasher switch - these are visible outside of the steering column cover Your turn signal lever / multi function switch operates : - turn signals - high beams - flash to pass - windshield wipers - windshield washer
