0
What do you do if your car makes a thumping when you apply the brakes and slows at the same speed as the car?
If it is coming out of the front, it sounds like a loose brake caliper, or loose brake pads. I would get it looked at asap.
sounds like disk was overheated and neads to be turned down. It usaually can be done once or twice before it needs replaced. If you ride the brakes or, going downhill hold the breaks and don't allow them ot cool. it'll overhead the rotor and they'll warp. Kind of like a clutch plate in a manual transmission.
It'll caost around $100.00 for rotor and disk pads for the front end.
ok it may be simplar than that! my 91 Mazda did the same thing. if you car has (ABS) brakes then it may be the relay. mine was out; replaced it and now it stops.
answer sounds like your rotars are out of round or cracked. to check this , remove wheel , look at rotars blue spots will indicate overheating and distotrion most cracks are visable
What else can I help you with?
What slows the car?
Applying the brakes.
If you are applying the brakes on your bicycle are you accelerating explain?
Using brakes slows your speed.
Do you know what to do if your car brakes go out while you are driving?
If your brakes go out while driving, first shift the vehicle into neutral and then apply the emergency brake. If neither of these slows the vehicle, turn on your safety lights and get into the right lane.
What causes thumping sound from rear wheel while braking that slows as car slows and no thumping if braking while in reverse even happens after installing brand new rotors and pads?
You should have someone pull off the hubs and check your bearings to see if they need to be replaced or just repacked
What force is used to slow down a bike?
strength New: The force of friction. When you apply the brakes, they grip the wheel, creating friction, which slows down the spinning.
What is the force that makes you bicycle brakes work?
The force that makes bicycle brakes work is friction. When the brake pads press against the wheel rim or disc, friction is created, which slows down the rotation of the wheel and ultimately stops the bike.
Why does the brakes get hot when a car slows down?
Friction causes the heat.
What force slows car hitting the brakes?
Generally speaking for cars that have "disk brakes", friction slows the car. When the driver presses down on the brake pedal the brake calipers squeeze the brake pads against the brake rotor inside each car wheel causing the car to slow down by friction.
When Maggie applies the brakes of her car the car slows unifromly from 15.4 meterspersecond to 0 ms in 2.46 s How many meters before a stop sign must she apply the brakes in order to stop at the sign?
You have given us the rate of deacceleration when Maggie applies the brakes of her car but at what velocity is Maggie travelling before the stop sign? Alternatively; having ceased all movement by applying the brakes of her car the question has no relevance.
You have a 97 Ford F-150 When the brakes applied there's thump when it slows down to about 20mph its consistent worn brakes the cause or other?
worn brakes could be the cause or check the A frame bushings
What force stops the motion of a bike?
friction by applying the brakes? When you apply the brakes, there are pads on either side of the metal part of the wheel, they squeeze together tighter and tighter until the wheel stops turning, which stops the motion of the bike.
What types of brakes does a hybrid car use?
These are the cars that use two types.The normal hydraulic friction brakes as on every automobileRegenerative braking where as the car slows the batteries charge. Neat!
