A light Emitting Diode....
Light Resistat Diode ...
the diode is forward bias ANSWER: A bypass diode is used to bypass circuitry as soon as the diode is forward bias by 0.6 volts The use it to bypass to prevent damage to the circuitry
A switch transient spike cannot damage a doide.
A series resistor is necessary when a diode is forward-biased to limit the current flowing through the diode and prevent damage to the diode. Without a series resistor, the diode could draw excess current and overheat, potentially causing it to fail. The resistor helps control the current and protect the diode in the circuit.
LED: light emitting diode. It is a diode that emits light when current passes through it
Peak reverse voltage of a diode is the maximum reverse bias voltage can be applied to diode which does not cause break down.
"nanometer" or billionths of a meter. 650 nanometers is the wavelength of the light produced by the diode.
light emitting diode and its a diode that emitting the light when the current passes through it and it used in the TV screen
The maximum voltage which can apply When diode in reverse bias..if it is exceed that voltage the diode may get damage.
light emitting diode
Liquid Crystal Diode.
Light Emitting Diode.
A short circuit fault in a diode occurs when there is an unintended low-resistance path that allows current to bypass the diode, typically due to a breakdown of its junction or an external failure in the circuit. This can happen due to excessive voltage, thermal stress, or physical damage, leading to a short between the anode and cathode. When this occurs, the diode can no longer control the flow of current, resulting in excessive current that can damage the diode and other components in the circuit. Proper circuit design and protective measures are essential to prevent such faults.