You can use any brake fluid that meets DOT3 rating.This rating is shown on all contain3 or a higher rating will work. A good rule to go by, is to use same fluid in clutch that you use in the brake system
check your clutch fluid level and your clutch slave cylinder for leaks,if both are ok,then you probly need a new clutch.
You cant it is a hydraulic clutch
yes
it cant be adjusted.
if its hydraulic,u cant,check your slave cylinder for leaks.
Dextron
It is on the clutch pedal. Meaning the clutch must be depressed in order to start the vehicle, since this effectively ensures the vehicle is in neutral.
If that is an automatic transmission, pull the dipstick and read it, it will tell what fluid to use.
drivers side port, fill to level of opening.
Windshield, Engine bay, and Door Jamb of the Drivers side
Brake and clutch fluid type: DOT 3 heavy duty brake fluid. - Haynes Repair Manual #36071, 1993-2005 Ford Ranger Pick-ups
you must have a clutch. put in second gear and push it and pick up some speed ,then engage cluch and put in second gear and release clutch ,make sure u have the key turned on.