Hovering your foot over the brake without actually pressing on the brake
Covering the brake is putting your foot over the brake pedal without touching it. Riding the brake is actually putting pressure on the brake pedal.
Holding your foot just above the brake pedal, In case you need to brake.
Covering the brake
Somebody who "rides" the brake is constantly applying pressure to the brake pedal with their foot. People who tailgate ride their brake alot. "Covering" the brake is a form of defensive driving. For example, while proceeding through a traffic light, you would want to take your foot off of the gas pedal and place it just above the brake pedal (without applying pressure) to decrease your reaction time in case you need to brake suddenly.
50%
follow the brake pedal under the dash , on top of the pedal will be a 2 wire switch that opens when the pedal is depressed. yes its wired in the harness The top of the brake pedal has a hard-rubber covering on it. Is this switch under this cover?
Take your toe and pick UP on the brake pedal. The brake pedal may not be returning as it should.
Generally it means you have your foot on the brake pedal.
If you mean the switch that puts the brake lights on and off when you step on the brake pedal then it's located where the brake pedal is, can't miss it.
On a 2004 Kenworth K104, the brake light switch is typically located near the brake pedal assembly, mounted on the bracket that holds the pedal in place. It is usually positioned so that it activates when the brake pedal is depressed. To access it, you may need to remove any covering or panels around the pedal area. Always consult the vehicle's service manual for precise details and diagrams.
To remove the pedal brake in a 2000 Nissan Frontier, start by disconnecting the negative battery terminal for safety. Remove the panel covering the brake pedal area, then unbolt the brake booster from the firewall and disconnect any necessary linkage. Finally, take out the brake pedal assembly by removing the retaining pin or bolt that holds it in place. Ensure to follow the vehicle's service manual for detailed instructions and safety precautions.
In an Oldsmobile Cutlass Ciera, the brake light switch is typically located above the brake pedal, mounted on the brake pedal assembly. It is activated when the pedal is pressed, completing the circuit for the brake lights. To access it, you may need to remove any covering or panel underneath the dashboard. Always consult the vehicle’s service manual for specific details related to your model year.