you will be fine with a summer / winter mix. . . between -30 degrees c and 50 plus c in the uk, most antifreeze will be of this calibre.
The Peugeot 4007 is a compact crossover sports utility vehicle (SUV). It is manufactured in several regions, including Okazaki in Japan, Born in The Netherlands, and Kaluga in Russia.
The Peugeot 4007 is a luxury car that is mostly affordable only by the rich and famous because of its hefty price tag, Despite its luxurious nature, a model of this car is available from Auto Trader.
The Peugeot 4007 is equipped with a timing belt rather than a timing chain. It's important to adhere to the manufacturer's recommended maintenance schedule for replacing the timing belt to prevent potential engine damage. Typically, this replacement interval is around 100,000 kilometers, but it's best to consult the owner's manual for specific guidance.
To wash out the coolant system in a Peugeot 307, first ensure the engine is cool and then drain the old coolant from the radiator and engine block. Refill the system with a mixture of water and a cooling system flush product, run the engine for about 10-15 minutes to circulate the flush, and then drain it again. Finally, refill the system with the appropriate coolant mixture and check for leaks. Always dispose of old coolant properly, as it is toxic.
The thermostat on a Peugeot 307 is located on top of the engine, under the upper radiator hose. It restricts the flow of coolant based on its temperature.
If you are looking at the car from the front... The coolant expansion tank (where you add coolant/water) is a large white header tank on the left at the rear of the engine bay. It is to the immediate right of the offside suspension strut.
For a 1999 Peugeot 106 Zest, the recommended coolant is a mixture of antifreeze and water, typically a 50/50 blend. It is advisable to use a high-quality ethylene glycol-based coolant that meets the specifications set by Peugeot. Always check the owner's manual for specific recommendations and ensure the coolant is compatible with the vehicle's engine materials.
To top up the engine coolant in a Peugeot 307, first ensure the engine is cool and locate the coolant reservoir, typically marked with a blue cap. Open the cap and add the appropriate type of coolant mixed with water, if necessary, until it reaches the "MAX" level on the reservoir. Be careful not to overfill, and securely close the cap when finished. It's advisable to check the owner's manual for specific coolant specifications and recommendations.
how do u change the timing belt in my 307
On a Peugeot 307 2.0 HDi, the coolant temperature sensor is typically located near the thermostat housing on the engine. It is usually positioned at the top of the engine block, where the coolant flows out. To access it, you may need to remove some engine covers or components for better visibility and reach. Always consult the vehicle's service manual for precise details and diagrams.
In the Peugeot 4007, the fuse for the alarm system is typically located in the fuse box under the dashboard on the driver's side. You may also find additional fuses in the engine compartment fuse box. To identify the specific fuse for the alarm, consult the vehicle's owner manual, which will provide a diagram and list of fuses. Always ensure the vehicle is turned off before checking or replacing any fuses.
The thermostat on a Peuget 206 is located on top of the engine, under the upper radiator hose. It controls the flow of coolant out of the engine.