For a 1999 Peugeot 106 Zest, the recommended coolant is a mixture of antifreeze and water, typically a 50/50 blend. It is advisable to use a high-quality ethylene glycol-based coolant that meets the specifications set by Peugeot. Always check the owner's manual for specific recommendations and ensure the coolant is compatible with the vehicle's engine materials.
When changing the spark plugs, it is important to leave the correct sized gap. For a 1999 Peugeot Zest 3 the spark plug gap is 0.8mm + or - 0.1 mm.
i have a peugeot 106 zest 3 1.5 s reg probulem with rear door not closing propely
that means its due for a service
This will tell youhttp://206gti.net/pvlbrakes/ Have Fun, Stantheman
the diagnostic socket on peugeot 307 is under the ash tray( behind the gear lever). Lift up and remove the rubber pad and there it is. Dave
The radio/casette player in a peugeot 106 comes with a 4 digit preset which is input by pressing 1,2,3 and 4....the combination is provided by Peugeot itself, if u have lost the combination then u might have to pay £30 to Peugeot to get it unlocked, it'll be cheaper to buy a new stereo.
If it's anything like mine you should find it just underneath the windscreen wiper areaAnd if its anything like mine, pug 106 Zest XN, it doesn't have a MAP sensor. ;)
hi i had the same problem and after taking it to the garage they told me my head gasket was on its way out, hope this helps
Avoid rain until you are able to get to a garage
To fit a wheel bearing on a Peugeot 106 Zest, start by lifting the car and removing the wheel. Then, detach the brake caliper and disc to access the hub. Remove the hub assembly, which typically involves unbolting it and using a puller if necessary. Finally, press in the new bearing and reassemble all components in reverse order, ensuring everything is torqued to the manufacturer's specifications.
You can use orange zest or lime zest as a substitute for lemon zest in the recipe.
You can use orange zest or lime zest as a substitute for lemon zest in a recipe.