0
What else can I help you with?
What describes the position of intake and exhaust valves during the most powerful stage in a four-cycle gas engine?
-intake: exhaust closed, intake open -compression: exhaust closed, intake closed -combustion: exhaust closed, intake closed -exhaust: exhaust open, intake closed
Which valves are the intake and exhaust on a 20r engine?
the intake are next to the carb and the exhaust are next to the exhaust manafold intake are .008 exhaust are .012 with the engine warm good luck
What do Both valves on a four stroke reciprocating engine open the?
In a four-stroke reciprocating engine, both valves—the intake valve and the exhaust valve—open to facilitate the engine's four distinct strokes: intake, compression, power, and exhaust. The intake valve opens to allow the air-fuel mixture into the combustion chamber during the intake stroke, while the exhaust valve opens to release exhaust gases after combustion during the exhaust stroke. This coordinated opening and closing of the valves ensure efficient engine operation and optimal performance.
What statement correctly describes the position of the intake and exhaust valves during most of the power stage in a four-cycle gas engine?
Both the intake and the exhaust valve are closed.
What is the valve clearance for a Isuzu 6bg1 engine?
0.14mm intake and exhaust
What is the time during the four stroke cycle when both valves are open?
During the four-stroke cycle, both the intake and exhaust valves are open simultaneously during the overlap period, which occurs at the end of the exhaust stroke and the beginning of the intake stroke. This typically happens just before the piston reaches the bottom of the exhaust stroke and just as it starts to descend for the intake stroke. The overlap allows for better scavenging of exhaust gases and aids in the intake of the fresh air-fuel mixture. The exact timing of this overlap can vary based on the engine's design and camshaft specifications.
How do you find the intake and exhaust lifters on a engine?
The exhaust lifters will line up with the exhaust manifolds,Remove the valve cover if your working on a V8 and the valve that lines up with the exhaust port will be the exhaust valve,If it is a Chevy V8 they will be from standing in front of the car exhaust,intake,intake,exhaust,exhaust,intake,intake,exhaust.
What is the difference between an intake manifold and an exhaust manifold?
The intake manifold is where the air and fuel mix and enter the engine. The exhaust manifold is where unspent gas and air exit the engine. In other words the intake manifold is where the engine breathes in and the exhaust manifold is how the engine exhales out.
What is the valve clearance of Isuzu 4BC2 engine?
17 intake 17 exhaust
How do you tell the differ beween the intake and the exhaust valve when adjusting on a350 engine 1988 corvette?
The intake valves are in the intake ports, the exhaust valves are in the exhaust ports.
What are Valve Lash Specs For A 86 22RE?
When the engine is hot .008 intake .012 exhaust or .007 intake .011 exhaust When the engine is cold
What happens if you switch intake and exhaust push rods on a 1999 Pontaic Grand Am with a 3.4L?
You will bend the rods and the valves and you will 'break' the engine
