Oil starts to leak from the gasket. Generally it doesn't pose a problem to the engine unless you run it out of oil. It does make a mess, however, and they're not that expensive or difficult to replace.
To change the gasket on a 2002 Saab 9-3, first ensure the engine is cool and disconnect the battery. Remove any components obstructing access to the gasket, such as the intake manifold or valve cover, depending on which gasket needs replacement. Clean the surfaces thoroughly to remove old gasket material, apply a new gasket with appropriate sealant if required, and reassemble the parts in reverse order. Finally, reconnect the battery and check for leaks after starting the engine.
Head gasket repair for a 1999 Saab 9-5 3.0l.
how much will it cost to replace rear bumper cover on 2003 93 saab
It depends on the year and equipment specifications. Need more information.
Follow the three small black silicon hoses coming from your turbocharger/intake system, and You find the valve!
yes.
The obvious place to start is the fuel filter. Is it clogged? I presume this car has a 2.0-liter, 16-valve engine. A Saab 900 16-valve shop manual will provide a list of possible causes and their solutions.
U.S. ratings:2.0L 8-valve = 110 HP2.0L 16-valve = 135 HP2.0L 16V turbo = 165 HP
Right, Front, between fender and plastic cover
It could be a bad head gasket or a leaking oil cooler. Doing a compression check should tell if it is a bad head gasket.
located behind the bumper cover under headlamp assembly
Through the overflow tank. Open the bleeder valve on the thermostat housing, turn heat to high, and pour coolant in the overflow tank until it comes out the bleeder valve.