If the driver's seat does not tilt back, it could be due to a malfunction in the seat adjustment mechanism, such as a broken lever or a faulty electric motor. It's advisable to check for any obstructions or debris that might be preventing movement. If the issue persists, consulting the vehicle's manual or taking the car to a mechanic for diagnosis and repair may be necessary. In the meantime, adjusting other seat settings like height or position can help improve comfort.
Remove the four bolts that secure the chair. Tilt the seat forward using a lever. Hold the chair from the back and remove it.
drivers seat does not go back?
you have to tilt the drivers seat right back then you will have access to the filler cap.The dipstick is the same on the passenger side
AnswerIt should be at the top of the dashboard behind the fuse panel cover.I have a 1995 Previa and it is not OBD II it is OBD I and the connector is located under the drivers seat which will tilt back if you trip the yellow lever under the seat.
There is one fuse panel located on the drivers side of the dash board that can be accessed with the door open, and there are two more under the back seat behind the drivers seat. You have to remove the lower back seat to get to those and the battery as well.
take a pry bar and stick it in where the seat tilts on the drivers side and tilt the seat half way gently pry between the seat and rear plastic side panel to release the retaining pin you may have to move it back and forth a bit because it only realeses in one spot once you have the drivers side out you must do the same for the passengers side .
It's probably the switch.
The knob adjusts the lumbar support in the driver's seat back.
There are two levers under the driver's seat of the 1992 Cabriolet. One lever moves the seat back and forth and the other offers a tilt option.
To tilt the seat in a Citroën Xsara Picasso, locate the lever or handle usually found on the side or front of the seat. Pull or lift this lever while adjusting your body position to tilt the seat back to your desired angle. Release the lever once you've found the right position to secure the seat. If necessary, consult the vehicle's manual for specific instructions tailored to your model.
Order a new seat locking lever from FORD, it should be accessable from the drivers side where you adjust the seat.
If you look between the seat cushion and the seat back you will find a strap allowing you to hinge the seat cushion forward, and there is a small knob on the seat back drivers side that needs to be pulled up.