answersLogoWhite

0

It's also called a clutch position switch. It basically makes it so that you're manual won't start unless you have the clutch pressed in. It's there to keep you from starting you're car in gear without the clutch depressed that you don't hit things and ruin your car.

User Avatar

Wiki User

14y ago

What else can I help you with?

Related Questions

How do you replace the clutch pedal ignition lock switch on an 06 Jeep Wrangler Rubicon?

To replace the clutch pedal ignition lock switch on a 2006 Jeep Wrangler Rubicon, first disconnect the negative battery terminal to prevent any electrical issues. Remove the panel under the dashboard to access the switch, then disconnect the wiring harness from the old switch. Unbolt the switch from its mount, install the new switch in reverse order, reconnect the wiring harness, and replace the panel. Finally, reconnect the battery and test the clutch pedal and ignition functionality.


Where is the ignition switch on a 1990 bronco xlt located?

The ignition lock is where you put the key. The ignition switch is located on the top of the steering column directly above the brake pedal.


In an emergency situation such as a runaway engine or a jammed gas pedal turning the ignition switch to lock will?

B


How to reset an oil change light on a Jeep Patriot 2012?

1. Turn the ignition switch to the ON position. Do notstart the engine.2. Fully depress the accelerator pedal, slowly, three timeswithin 10 seconds.3. Turn the ignition switch to the OFF/LOCK position.1. Turn the ignition switch to the ON position. Do notstart the engine.2. Fully depress the accelerator pedal, slowly, three timeswithin 10 seconds.3. Turn the ignition switch to the OFF/LOCK position.


What does an ignition switch do for a 1997 jeep?

It engages and disengages the lock that starts the vehicle. There are 2 parts to the switch. The ignition switch and the lock assembly.


Do you need to remove the ignition lock to replace the ignition switch on a 94 Honda Accord LX?

no the switch can be independly remove from the back side of the ignition lock


How do you change the clutch pedal ignition lock switch?

Easy change, simply use your hands, some tools, and skill. If your missing any of these then call a qualified technician I don't have my Haynes manual in front of me, but if memory serves, it contains instructions on how to change that switch. It's a good idea to have a manual for your car anyway.


Is a faulty key switch the same as ignition switch or is it the key lock?

no


What do you do when the Key won't turn the in dash ignition on a 1999 grand am se?

change the Ignition Lock lock switch


Are ignition switch and lock cylinder 2 different parts on 1993 Dodge Dakota?

Yes. The lock cylinder is metal part that the key goes into. The ignition switch houses the lock cylinder.


Why won't my ignition switch turn back into lock position after changing the ignition switch?

Ur life suck that why


How do you remove the ignition switch from a 1988 Dodge Ram 50?

Ignition switch and lock cylinder removal 1988 Dodge Ram 50.Disconnect the negative battery cable from the battery.Remove the steering column cover to gain access to the ignition switch/lock cylinder.Using wire cutters, remove the cable band.Remove the bolts that hold the ignition switch/lock cylinder to the steering column.Unbolt and remove the key reminder switch and remove the switch lock cylinder from the steering column.