0
What else can I help you with?
Which brand sells both 4 Channel and 2 Channel Amps?
Pioneer sells both 2 and 4 Channel Amps. Many of these can also be bridged, meaning they can combine 2 channels for extra output. anonymous@oola.com
Is a 250 watt mono channel amp good enough for 2 100 watt amps?
Monoblock amp? No. Only 1 channel which is good for one speaker, or one sub. What you need is either a 2 channel amp or a bridgeable 4 channel amp, which would be overkill anyway. If the amp you have is 2 channel, it would be ideal.
How many amps will 2-2-2-4 carry at 180 feet?
150 amps
What is the differences in a 1 channel amp and a 2 channel amp?
when you connect the rcas to a 1 channel (mono) amp. the signal from the left rca and right rca is combined to give you a mono signal. that signal is then amplified and sent out through the one channel. a 2 channel amp will send the signal from the left rca to one channel and the signal from the right to the other channel. mono amps are usually used to power subwoofers. 2 channel and 4 channel amps are usually used to power speakers 5 channel amps are usually ment to power speakers plus a subwoofer/subwoofers 2 channel amps are also used to power subwoofers in different situations. if you have one subwoofer with a 4 ohm impendance your better off powering that sub with a 2 channel amp instead of a mono amp. this is because you can "bridge" the 2 channels for this sub which will put a 2 ohm load on each channel. which theoretically means it will put out twice as much power as it would compared to if it had a 4 ohm load on each channel. this means that you can buy a less powerful amp which will be cheaper for you, and also smaller, so it will take up less space.. a big bonus in car audio. bridging is simply using both channels for one load (sub/s), this is done by connecting the pos. wire to the pos. output of one channel and connecting the neg. wire to the neg. ouput of the other channel. pretty much every amplifier in production nowadays is bridgable.
What is a 3 4 and 5-Channel Amp used for with bass in a car?
With Subwoofers only, you would want to go with only a 1 channel or 2 channel amp, 5 channel amps are designed to power 4 smaller speakers, and 1 subwoofer. Each channel basically refers to a different speaker - if you're using 2 regular left and right Speakers (not Subwoofers), use 2 channel setting, if you have 4 Speakers plus a subwoofer, use 5 channel setting. Make sure subwoofer is tested with the lowest gain/volume.
Is better to have a mono amp or 2 channel amp to 2 sub-woofers?
You won't notice any stereo separation with two subwoofers because our ears perceive bass as omnidirectional. Two subs can make more volume than one of the same size. If you are using two subs, you should either use two separate mono amps, or a two channel setup. As long as the amps have a high pass filter they will work equally well, although the wiring will be simpler for the two Chanel setup.
2 door speakers do you need a 4 channel amp?
No that would be a 2 channel amp. 1 speaker per channel. 2 speakers= 2 channels 4 speakers= 4 channels
What is a channel in amplifier mean?
a channel refers to the speakers or subs. for example a 2 channel amp can power 2 subs or speakers. a 4 channel will power 4.
Does the Kicker 4-Channel Car Amplifier have a fast respons?
Yeh, the response time of this amp is comparable to similar priced amps.
Yes you can bridge this amplifier to a 2 channel at 4 ohm per channel for 200 watts out of each channel.?
Yes you can bridge this amplifier to a 2 channel at 4 ohm per channel for 200 watts out of each channel.
4 volts is a many watts?
4 volts and how many amps? Watts = amps x volts. It depends on the amount of current (in Amps) flowing at 4 Volts... See Ohms Law: Watts = Volts x Amps If you have 2 Amps flowing at 4 Volts you are dissipating/consuming 8 Watts. If you have 10 Amps flowing at 4 Volts you are dissipating/consuming 40 Watts.
How do you get 4 ampere from 2 volt power supply?
if you connect a 0.5 ohm load to it, the power supply will try to push 4 amps through it. but 4 amps@ 2 volts is quite a lot, and it may not succeed.
