0
generally more than three shafts contact by coupling together in steam turbine. the shaft is heavry and will be sag. in order to reduce the bend force on coupling and bend force on bearing, the engienering calclated the shaft and simulated when its in operation condition. so, the catenary curve and bearing elevation data have been provided for steam turbine installation.
What else can I help you with?
Why catenary important in alignment of turbine?
A catenary is the shape formed by a hanging chain or cable under its own weight. In wind turbine alignment, the catenary is important because it helps to position the turbine blades in a way that maximizes their efficiency in capturing wind energy. By aligning the turbine blades along the catenary curve, the blades can better adapt to changing wind conditions and generate more power.
What is catenary of turbine?
Catenary is the curve formed by the Turbine Rotors when they are placed on their respective Bearings.The level of each bearing and its housings are ear marked or indicated by the manufacturer of turbines.At the time of erection this is to be followed by laser alignment or by piano wire,water level etc
Why extraction taken from steam turbine?
Why extractions are taken out from steam turbine.
Why would you not heat the steam coming out of turbine and feedback to turbine?
Steam is redirected back into the boiler from the high-pressure turbine for reheating, but the steam from the low-pressure turbine enters into a condenser to become water again.
What are the preventive maintenance of steam turbine?
The preventive maintenance of steam turbine mainly entails frequent servicing of the parts. This will ensure a smooth performance of the steam turbine.
What is heat rate of steam turbine How to calculate heat rate of steam turbine?
manish
What type of cycle used in steam turbine?
Rankine cycle is used in steam turbine
Why you are maintain the vacuum in steam turbine explain me briefly?
why we are maintain vacuum in steam turbine at steam outlet or exhaust side
Nozzle clearance how to steam turbine?
Steam turbine nozzle clearance is the total energy content available in steam. This is through a valve.
What causes steam turbine governor hunting?
inconsistent load will cause steam turbine hunting.
What is positive axial displacement of steam turbine?
axial shift of a steam turbine is the shifting of turbine rotor in the forward and backward direction due to steam thrust on blades of rotor.
How TO generate electricity from steam?
To generate electricity from steam, a steam turbine is typically used. High-pressure steam is directed onto the turbine blades, causing the turbine to spin. The spinning turbine is connected to a generator, which converts the mechanical energy into electrical energy.
