answersLogoWhite

0

What else can I help you with?

Continue Learning about Mechanical Engineering

What the difference between extraction and bleeding in steam turbine?

bleed is amount of steam output from turbine through pipe and exit from final stage of turbine . this bleed enter to feed water heater (low and high) and deaereator to increase unit efficiency or rather bleed is the amount of steam drained out of the steam turbine during the expansion of steam and this rejected heat energy is used to heat the feed water supplied to the boiler...........


What type of cycle used in steam turbine?

Rankine cycle is used in steam turbine


Why LP turbine rotor expansion is more than casing?

In a low-pressure (LP) turbine, the rotor expansion is greater than the casing due to the design and operational conditions of the turbine. The rotor experiences a significant drop in pressure and temperature as steam expands through the turbine stages, resulting in a larger volumetric increase compared to the casing, which is designed to contain the steam flow with minimal expansion. This difference allows for efficient energy extraction from the steam, optimizing the turbine's performance while maintaining structural integrity in the casing. Overall, the rotor's greater expansion accommodates the dynamic changes in steam properties as it moves through the turbine system.


Nozzle clearance how to steam turbine?

Steam turbine nozzle clearance is the total energy content available in steam. This is through a valve.


What causes steam turbine governor hunting?

inconsistent load will cause steam turbine hunting.

Related Questions

What is controlled and uncontrolled extraction in double extraction steam turbine?

The extraction of steam can either be controlled or uncontrolled. In an uncontrolled extraction the pressure of the extracted steam will decrease with an increase in extraction flow from the turbine. In a controlled extraction the extraction pressure is kept constant as extraction flow is increased or decreased.


How does an extraction turbine work?

An extraction turbine is a type of steam turbine that operates by extracting a portion of the steam at intermediate pressure from the turbine for use in heating or other processes. As steam enters the turbine, it passes through various stages, converting thermal energy into mechanical energy to drive the turbine blades. The extracted steam is typically at a lower pressure and temperature, which makes it suitable for applications like district heating or process heating in industrial settings. The remaining steam continues through the turbine to generate additional power before being condensed and returned to the boiler system.


What the difference between extraction and bleeding in steam turbine?

bleed is amount of steam output from turbine through pipe and exit from final stage of turbine . this bleed enter to feed water heater (low and high) and deaereator to increase unit efficiency or rather bleed is the amount of steam drained out of the steam turbine during the expansion of steam and this rejected heat energy is used to heat the feed water supplied to the boiler...........


Why would you not heat the steam coming out of turbine and feedback to turbine?

Steam is redirected back into the boiler from the high-pressure turbine for reheating, but the steam from the low-pressure turbine enters into a condenser to become water again.


How much does a small steam turbine cost?

Small steam turbines can range in price from $5,000 to $50,000 depending on the size, capacity, and manufacturer. Additional costs for installation, maintenance, and accessories should also be taken into consideration when budgeting for a small steam turbine system.


What are the preventive maintenance of steam turbine?

The preventive maintenance of steam turbine mainly entails frequent servicing of the parts. This will ensure a smooth performance of the steam turbine.


What is heat rate of steam turbine How to calculate heat rate of steam turbine?

manish


What type of cycle used in steam turbine?

Rankine cycle is used in steam turbine


Why LP turbine rotor expansion is more than casing?

In a low-pressure (LP) turbine, the rotor expansion is greater than the casing due to the design and operational conditions of the turbine. The rotor experiences a significant drop in pressure and temperature as steam expands through the turbine stages, resulting in a larger volumetric increase compared to the casing, which is designed to contain the steam flow with minimal expansion. This difference allows for efficient energy extraction from the steam, optimizing the turbine's performance while maintaining structural integrity in the casing. Overall, the rotor's greater expansion accommodates the dynamic changes in steam properties as it moves through the turbine system.


Why you are maintain the vacuum in steam turbine explain me briefly?

why we are maintain vacuum in steam turbine at steam outlet or exhaust side


Nozzle clearance how to steam turbine?

Steam turbine nozzle clearance is the total energy content available in steam. This is through a valve.


What causes steam turbine governor hunting?

inconsistent load will cause steam turbine hunting.