answersLogoWhite

0

Sounds like it might be a bearing problem.

User Avatar

Wiki User

17y ago

What else can I help you with?

Related Questions

Where do you pour the power steering fluid in a 1988 Chrysler 5th avenue?

In the power steering pump located on the front right side of the engine. It will have a pulley on it


How do you adjust the timing in a 1985 Chrysler 5th avenue?

turning the distributor adjusts the timing, get a timing light and the timing marks are down by the crank pulley.


Diagram alternator belt 1985 Chrysler fifth avenue?

To diagram the alternator belt on a 1985 Chrysler Fifth Avenue, you would typically depict the belt routing around the crankshaft pulley, alternator, and potentially the power steering pump, depending on the specific engine configuration. The belt loops around the crankshaft’s lower pulley, travels up to the alternator, and may wrap around any additional components like the power steering or air conditioning compressor. A tensioner may also be included in the diagram to indicate how the belt is tightened. For detailed visuals, it's best to consult a service manual or repair guide specific to that model.


Loosen tension pulley 1991 Chrysler new yorker?

To loosen a tension pulley on a 1991 Chrysler New Yorker, turn the nut in the center of the pulley. This will allow the pulley to slide in the cut-out groove so that the belt will loosen.


How do you replace an air conditioning belt on an Avalanche?

You will need to loosen the tensioner pulley. When the tensioner pulley is loose the air conditioning compressor belt will become loose. Put the new belt on and tighten the tensioner pulley.


What is bottom pulley called on 97 Chrysler cirrus lx?

That would be the crankshaft pulley.


What is a squealor in an air conditioning system?

To me it would mean that you have a drive belt that squeals either because its worn out or something is causing it to squeal like a bad pulley or one of the components that the belt rides on........


What is Chrysler part 4663563?

It is a pulley that was used from 1994-2004.


Can i bypass the air conditioning pulley in 1995 infiniti g20?

The air conditioning pulley in a 1995 Infiniti G20 can be bypassed if the proper size belt is used for the alternator and radiator fan. This means that the air conditioning pump will not function, but if it is defective, this is one way to fix the problem.


What is the pulley configuration for a 1969 Chevelle ss 396?

It depends on what options the car is equipped with. Does it have Air Conditioning? Does it have Power Steering? If it has neither, then the belt runs around the crankshaft pulley, water pump, and alternator. Power steering adds another groove to the crankshaft pulley, and another pulley on the pump itself. Same with Air Conditioning.


Replace the AC drive belt on Geo Metro?

Begin by loosening the tensioner pulley. Take the old air conditioning drive belt on. Put the new air conditioning drive belt on and tighten the tensioner pulley.


Air conditioning belt on 1999 Chrysler LHS keeps breaking have replaced it 2 times in the last 2 months?

that could mean there is a bent pulley causing the belt to ride crooked and break. It could also mean one of the pulleys is locking up(not turning), which will also cause the belt to break. Overtightening the belt will also cause the belt to break. I'm betting one of the pulleys is locking up. I would check the a/c compressor pulley first, then the others.