75in
NAPA 25-070825 or Dayco 5070825 These belts will work for installing/bypassing with no A/C
An ac bypass pulley for a 1989 Chevrolet can be purchased at any auto parts store. The cost for the pulley starts at $26.04.
hey had this same prob u cant bypass it but you can buy a bypass pulley but gotta remove the compressor i tried to bypass with a belt but its not enough tension so get the pulley and your good to go
You remove the ac compressor and install a pulley bypass kit from a part store.You remove the ac compressor and install a pulley bypass kit from a part store.
you can not run it without having apulley in place of the a/c compressor because of belt routing. the pulley bracket needs to b custom made
yes you can, just go buy an ac bypass pulley, pull your compressor, and put pulley in its place
remove compressor put a bypass pulley in its place replace belt
no
Bypass, in what way? Your pulley is broken, and the belt is off. The A/C will no longer work and the compressor will not turn.
It is not recommended to bypass an idler pulley as it plays a crucial role in the functioning of the drive belt system. You may experience issues such as increased belt wear, noise, and decreased performance if you bypass the idler pulley. It is best to replace a faulty idler pulley to ensure the proper operation of your vehicle.
You can bypass the power steering pump pulley in your 1993 Buick regal 3.8 liter engine. Measure the distance around the other pulleys, without the power steering pump pulley. Take the measurement to your local auto-parts stores and ask for a belt of that measurement.
You can't bypass with a belt alone. You have to by a bypass pulley kit. The new pulley takes the place of the ac compressor and you use the same size belt.