answersLogoWhite

0

pooda panni

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

What is the Composition of fuse wire?

Fuse is an alloy of lead and tin.


What is fuse wire?

copper and tin


What is fuse wire made?

copper and tin


What are the mixtures in fuse wire?

tin lead alloybasically tin lead allows are used . but other metals which have low melting point and appropriate resistivity can be used


What type of wire is used in fuse and why?

Fuse wire is usually made with metal that has a low melting point, e.g. tin, to lessen the risk of fire.


Is it safe to use copper to repair electrical fuse?

yes very safe.add. Fuse wire is usually made of tin-plated copper. The fuse wire may well get warm in service, and a bare copper wire will gradually oxidize and will fail sooner as a consequence.


What is the wire in a fuse made?

The wire in a fuse is typically made of a material that has a lower melting point than the surrounding components. When too much current flows through the fuse, the wire heats up and melts, breaking the circuit and protecting the electronics from damage.


Which alloy is used to make electric fuse?

Solder ( an alloy of Lead and Tin) is used to make fuse wire because of its very low melting point.


What is the chemical composition of tin?

Tin is a chemical element with the symbol Sn and atomic number 50. Its chemical composition is typically just the element tin itself.


The commonly used Safety fuse wires is made of?

Safety fuse wires are typically made of a mixture of lead and tin. This combination of metals allows the fuse wire to have a low melting point, enabling it to break and interrupt the circuit in case of overloading or short circuit.


Why a fuse wire is made up of alloy of lead or tin plated copper wire?

because of its low melting point and high resistance.add. Because of the tendency of a fuse wire to become slightly warm during normal use, its surface would tend to oxidize and thus diminish its cross-section during ordinary service. Leading to premature and improper failure.So it is important to protect the surface of fuse wire against corrosion.AnswerAlloys (e.g. tin/lead) are used due to their 'eutectic' action -i.e. the resulting combination of good conductivity (due to the tin) with a low melting point due to the lead).


Which metal is used in a fuse wire?

Electric fuse wire is not made of a single metal but an alloy made of tin (63 %) & lead (37 %). The cross sectional area determines the melting point at a certain current (amps) and is also rated as volts / rating.