A universal plug.
It's a 17mm, but you could have discovered that by trying wrenches or sockets until one fit. --Ken
Yes. They are the usual three square pin plugs and sockets as in the UK.
18mm My 2005 Kymco 250cc Grandvista / Grand Dink takes this plug and I use a standard 3/8" drive 18mm Deep socket when changing the plug because none of my other sparkplug deep sockets fit.
Si
LIF sockets stand for low insertion force. LIF sockets are sockets commonly used for early generation computer processors. LIF is used to provide an "interference fit" between two components (a plug and a socket) so that a small amount of force is required to engage them and fully use.
If they were metal and the live had somehow come loose and was touching the casing, it would make the plug case live too. However electricity does not flow through plastic because the electrons can't pass.
All HDMI cables shoudl fit all HDMI sockets, but the mechanical size of the plugs jacket could be a problem if space is tight around the socket. Be aware that there are now mini versions of HDMI connectors (so-called type C). If your cable or connector are different sizes you can purchase type adapters.
Honda Fit Spark plug gap is .043 in or 1.1 mm.
Only I7 CPU family, no other processors.
Fairly easy. remove the serpentine belt. Remove the pulley from the water pump. You need the sockets that fit those bolts and the sockets that fit the pump's mounting bolts. Get gasket sealer too.
The main difference between e11 and e12 light bulb sockets is their size. E11 sockets are smaller and have a diameter of 11mm, while E12 sockets are slightly larger with a diameter of 12mm. This means that E11 bulbs are not compatible with E12 sockets and vice versa. It is important to check the socket size before purchasing a light bulb to ensure it will fit properly.
All you need is a socket that will fit inside of the freeze plug and a hammer to drive it back in the block. You don't need a special tool.