.44
13ft/lbs
The spark plug gap for a 1993 Honda CBR600F2 motorcycle should be set at .036 inches. An auto parts store should carry a spark plug to fit this motorcycle.
NGK CR8EH-9 Projected Resistor Type Spark Plug Have fun :-)
On a 2008 Honda Fit, the spark plugs are located beneath the ignition coil packs, which are situated on top of the engine. To access them, you'll need to remove the engine cover and the coil packs, as they are directly mounted on top of each spark plug. The spark plugs themselves are found in the cylinder head, with each plug corresponding to a cylinder in the engine.
A drain plug for a spark plug? Now why would there be? What would you drain from a spark plug.... the spark? If you're referring to a plug for the spark plug socket, I'm sure you could find something that would fit that would keep out debris while you let you engine sit without plugs. (Why??)
In your tool kit you should have a rench that will fit on the plug. You pull off the spark plug wire and take out the spark plug. Make sure the gap is set right for the new plug and put in in. Do not over tighten.
.040. Many plugs that fit the CRV are already gapped to .040. The correct spark plug gap is typically posted on a label on the underside of the hood.
The 2007 Honda Fit has 16 valves.
i use ngk cr7hsa in my 79 xr 80, its a pritty standed plug a Honda shop should have it
The 2007 Honda Fit is a gas-powered vehicle.
The 2007 Honda Fit has a 5-speed manual.