13ft/lbs
Honda Fit Spark plug gap is .043 in or 1.1 mm.
.44
The spark plug gap for a 1993 Honda CBR600F2 motorcycle should be set at .036 inches. An auto parts store should carry a spark plug to fit this motorcycle.
NGK CR8EH-9 Projected Resistor Type Spark Plug Have fun :-)
On a 2008 Honda Fit, the spark plugs are located beneath the ignition coil packs, which are situated on top of the engine. To access them, you'll need to remove the engine cover and the coil packs, as they are directly mounted on top of each spark plug. The spark plugs themselves are found in the cylinder head, with each plug corresponding to a cylinder in the engine.
.040. Many plugs that fit the CRV are already gapped to .040. The correct spark plug gap is typically posted on a label on the underside of the hood.
i use ngk cr7hsa in my 79 xr 80, its a pritty standed plug a Honda shop should have it
To replace the spark plugs in a Honda Fit, start by ensuring the engine is cool and disconnect the negative battery terminal. Remove the ignition coil or plug wire to access the spark plugs, then use a spark plug socket and ratchet to unscrew and remove the old plugs. Before installing the new plugs, check and adjust the gap as necessary, then thread them in by hand and tighten them to the manufacturer's specifications. Finally, reconnect the ignition coils or plug wires and the negative battery terminal.
8...
The 2010 Honda Fit's engine produces 106 ft-lbs. @ 4800 rpm.
The 2009 Honda Fit's engine produces 106 ft-lbs. @ 4800 rpm.
The 2012 Honda Fit's engine produces 106 ft-lbs. @ 4800 rpm.