answersLogoWhite

0

A solenoid plug is an electrical component that connects a solenoid, which is an electromechanical device that converts electrical energy into linear motion, to a power source or control system. It typically includes connectors and terminals that facilitate the electrical connection and may also incorporate features for mounting or securing the solenoid. Solenoid plugs are commonly used in various applications, such as automotive systems, industrial machinery, and automation equipment.

User Avatar

AnswerBot

1w ago

What else can I help you with?

Related Questions

1984 Chevy 6.2 glow plug indicator just stoped and won't light up and so glow plugs arn't warm to run?

The glow plug controller or power solenoid has likely failed. The solenoid is located on the driver's side inner fender. If the solenoid tests ok with the key in run, then replace the glow plug controller.


Where is the torque converter solenoid plug located on a 1995 Pontiac Transport?

front of the tranny facing the radiator. its either a square six prong plug or a round plug


Where is Acura CL transmission solenoid at FOR 2001?

where"s the solenoid for a acura cl 2001


Where is the solenoid on 1984 Chevy S-10 blazer?

Starter solenoid? It is attached to the starter.


Where is the solenoid on the 1990 Chevy s-10?

If you are looking for the starter solenoid, it is attached to the starter.


97 Pontiac gran prix 3800 supercharged it has a 2-3 shift solenoid code and you need to know which solenoid is the 2-3 solenoid?

alot of the time it is a wiring problem between the engine control module and the transmisssion plug. you can test this wire for continuity The yel/bk wire on pin 44 on the blue plug on the ecm module. Unplug the transmission plug off the side of the transmission and check from ecm module located in the airbox to the plug for continuity. i don't have the pin layout for the plug on the transmission, but by process of elimination you can figure it out. below is a wiring diagram showing the 2-3 shift solenoid. alot of the time it is a wiring problem between the engine control module and the transmisssion plug. you can test this wire for continuity The yel/bk wire on pin 44 on the blue plug on the ecm module. Unplug the transmission plug off the side of the transmission and check from ecm module located in the airbox to the plug for continuity. i don't have the pin layout for the plug on the transmission, but by process of elimination you can figure it out. below is a wiring diagram showing the 2-3 shift solenoid.


How do you check canister purge solenoid?

[A] short wires across on plug read code then run car [read and note code] [B] unshort plug run car ,[read and note code ][C] replug back in solenoid run [note and read code] which fault did u first have before test .If A short in solenoid itself ,If b in all tests broken wire .If c solenoid or tank leak [canister]


Where is the starter solenoid located on a 1994 Chevy S 10 pickup?

The starter solenoid is mounted directly on the starter.


Where is the shift solenoid on a 2002 Dodge truck?

The automatic transmission solenoid s are inside the transmission, on the valve body.


Chevy s-10 1998 starter solenoid where is it located?

The starter solenoid is attached to the starter. Follow the positive battery cable from the battery, it will lead you to the starter solenoid. The starter would have to be removed to replace the starter solenoid.


Where is the solenoid on 1993 chevy s-10?

The starter solenoid is mounted directly to the starter. Just follow the positive battery cable from the battery, it will lead you right to the starter solenoid.


What does obd code p0795 on an s-type mean?

Pressure control solenoid "c". Located in solenoid assembly block