0
What else can I help you with?
What is the correct spark plug gap for a TROY BILT grass trimmer model tb15cs?
The owners manual states that the proper plug gap is .020"
What is the correct spark plug for Troy -Bilt tb475ss string trimmer?
Rdz19h
How do I replace the string on my Ryobi string trimmer?
To replace the string on your Ryobi string trimmer, first turn off the trimmer and disconnect the spark plug. Then, remove the spool housing and take out the old string. Cut a new piece of string to the appropriate length and feed it through the trimmer head. Wind the string in the direction indicated on the spool and secure the ends. Finally, reassemble the trimmer and test it before use.
How can I change the string on my Ryobi weed trimmer?
To change the string on your Ryobi weed trimmer, follow these steps: Turn off the trimmer and disconnect the spark plug wire for safety. Remove the spool housing by pressing the tabs on the sides and pulling it off. Take out the old string spool and replace it with a new one. Feed the new string through the holes in the spool and secure the ends. Place the spool back into the housing and reattach it to the trimmer. Reconnect the spark plug wire and test the trimmer to ensure the string is working properly.
What is the correct spark plug for troy-bilt tb80ec string trimmer?
Wut a mess trying to replace this plug!! Prob gotta order it, but part # 753-06193.
How do I perform a Ryobi trimmer string replacement?
To perform a Ryobi trimmer string replacement, first turn off the trimmer and disconnect the spark plug. Remove the spool cover and take out the old string spool. Cut a new piece of trimmer line to the appropriate length and insert it into the spool. Wind the new line evenly onto the spool in the direction indicated on the spool. Reassemble the trimmer and test the new string before use.
What is the correct spark plug for Troy-Bilt TB20CS string trimmer?
FROM THE OWNERS MANUAL: REPLACING THE SPARK PLUG Use a Champion RDJ7Y spark plug, or equivalent. The correct air gap is 0.020 inch (0.5 ram). Remove the plug after every 25 hours of operation and check its condition. 1. Stop the engine and allow it to cool. Grasp the plug wire firmly and pull it from the spark plug. 2. Clean around the spark plug. Remove the spark plug from the cylinder head by turning a 5/8-inch socket counterclockwise. 3_ Replace a cracked, fouled or dirty spark plug. Set the air gap at 0.020 in. (0.5 ram} using a feeler gauge. You can get the manual at: http://www.managemylife.com/mmh/lis_pdf/OWNM/L0601244.pdf
How do I replace the line on a Ryobi RY15523A trimmer?
To replace the line on a Ryobi RY15523A trimmer, follow these steps: Turn off the trimmer and disconnect the spark plug wire. Remove the spool from the trimmer head. Cut a length of replacement trimmer line. Insert the line into the trimmer head following the arrows for the correct direction. Wind the line evenly and tightly onto the spool. Reassemble the spool onto the trimmer head. Reconnect the spark plug wire and test the trimmer.
How do you properly string a weed eater?
To properly string a weed eater, first, turn off the engine and disconnect the spark plug. Then, remove the spool from the trimmer head and unwind any remaining old string. Cut a new piece of trimmer line to the recommended length and insert it into the spool, following the directional arrows. Finally, reassemble the spool onto the trimmer head and secure it in place.
What is the spark plug for craftsman 3.0 edger trimmer?
Champion CJ8 spark plug is for the crsftsman 3.0 edger/trimmer
How do you breakdown a ryobi start plus cs30 trimmer?
spark plug is good but when its plug in to coil on spark
Spark plug gap for a stihl FS45 trimmer?
0.020"
