0
FROM THE OWNERS MANUAL:
REPLACING THE SPARK PLUG
Use a Champion RDJ7Y spark plug, or equivalent. The
correct air gap is 0.020 inch (0.5 ram). Remove the plug
after every 25 hours of operation and check its condition.
1. Stop the engine and allow it to cool. Grasp the plug
wire firmly and pull it from the spark plug.
2. Clean around the spark plug. Remove the spark plug
from the cylinder head by turning a 5/8-inch socket
counterclockwise.
3_ Replace a cracked, fouled or dirty spark plug. Set the air
gap at 0.020 in. (0.5 ram} using a feeler gauge.
You can get the manual at: http://www.managemylife.com/mmh/lis_pdf/OWNM/L0601244.pdf
What else can I help you with?
What is the correct spark plug for Troy Bilt TB20CS string trimmer?
RDJ7Y Champion
Why would you have to have engine at almost full choke to keep running on your Troybilt TB20cs string trimmer what could cause this?
Could be that the small breather hole in the cap is clogged up. Wash it out with some brake cleaner or another aerosol solvent and see what happens.
How do I replace the string on a Ryobi 40 volt trimmer?
To replace the string on a Ryobi 40-volt trimmer, first, remove the spool cover and old string. Then, wind the new string onto the spool following the arrows for the correct direction. Finally, reassemble the trimmer and trim the excess string.
How can I extend the string on a Ryobi trimmer?
To extend the string on a Ryobi trimmer, you need to follow these steps: Turn off the trimmer and disconnect it from the power source. Locate the trimmer head and remove the spool cover. Take out the old string and cut a new piece to the appropriate length. Insert the new string into the trimmer head following the arrows for the correct direction. Wind the string evenly and securely onto the spool. Reassemble the trimmer head and spool cover. Test the trimmer to ensure the string is working properly.
What is the correct spark plug for Troy -Bilt tb475ss string trimmer?
Rdz19h
What is the best way to replace the weed trimmer string on a trimmer?
To replace the weed trimmer string on a trimmer, follow these steps: Turn off the trimmer and disconnect it from the power source. Remove the spool housing by pressing the tabs on the sides and pulling it out. Take out any remaining old string from the spool. Cut a length of new trimmer string according to the trimmer's specifications. Insert the ends of the string into the holes on the spool. Wind the string evenly and tightly around the spool in the direction indicated on the spool. Reassemble the spool housing and reconnect it to the trimmer. Test the trimmer to ensure the string is working properly.
How do you refill a Ryobi string trimmer?
To refill a Ryobi string trimmer, you need to first turn off the trimmer and remove the spool cap. Then, take out the empty spool and replace it with a new one, making sure to wind the trimmer line in the correct direction. Finally, reattach the spool cap and you're ready to trim again.
How do I replace the string on my Ryobi string trimmer?
To replace the string on your Ryobi string trimmer, first turn off the trimmer and disconnect the spark plug. Then, remove the spool housing and take out the old string. Cut a new piece of string to the appropriate length and feed it through the trimmer head. Wind the string in the direction indicated on the spool and secure the ends. Finally, reassemble the trimmer and test it before use.
How is a whipper snipper related to a string trimmer?
A whipper snipper is related to a string trimmer by the fact that they both are the same thing. In other words, whipper snipper is a synonym for a string trimmer.
What is the best method for replacing the weed trimmer line on a string trimmer?
To replace the weed trimmer line on a string trimmer, follow these steps: Turn off the trimmer and disconnect the power source. Remove the spool housing by pressing the tabs or unscrewing the cap. Take out the old line and cut a new piece to the appropriate length. Insert the new line into the trimmer head following the arrows for the correct direction. Reassemble the spool housing and test the trimmer.
How do you string a dual line remington trimmer?
It is easy to string a dual line Remington trimmer by following the instructions in the manual. The manual was supplied with the trimmer when purchased.
What are common uses for a cordless string trimmer?
A cordless string trimmer is used to keep the edge of your lawn neat. You can also use a gas powered trimmer..
