9.8 ounces
210cc per leg
The fork oil capacity for a 1982 Honda CB900F is approximately 10.6 ounces (315 mL) per fork leg. The recommended fork oil type is typically 10W, but you may also consider using 15W for a firmer feel, depending on your riding style and preferences. Always refer to the owner's manual for the most accurate specifications.
The fork oil capacity for a 1982 Yamaha XT 200 is approximately 190ml (6.4 ounces) per fork leg. However, it's always a good idea to refer to the owner's manual or service manual for precise specifications and recommendations, as variations may occur based on modifications or maintenance history.
The fork oil capacity for a 1982 Honda CB750C is approximately 10.6 ounces (or about 315 milliliters) per fork leg. It's important to check the owner's manual or service guide for specific details, as variations may exist based on modifications or service history. Always ensure to use the recommended type and viscosity of fork oil for optimal performance.
yes, there actually alot simplier than the 750 forks, but u do lose air assist and antidive, but when u have to replace a fork seal ull be happy u did it. I have a xj750j Maxim with xj650g forks on it. didnt know they were different forks till i dug into them, but they rode perfectly smooth. unforfuantly i did loose dual disks on the front, but my single disk is noticably bigger than a one of the dual disks.
r1 fork oil capacity
Mine uses air....
what is the capacity or how much fork oil does a vz800 take ?
The 1985 Yamaha XJ700 Maxim requires approximately 10.6 ounces (or about 315 milliliters) of fork oil per fork leg. It's important to use the manufacturer's recommended fork oil type and viscosity, typically 10W for this model. Always refer to the service manual for specific guidelines on maintenance and oil levels.
320cc is the fork oil capacity on early K model CB500s.
St1300 fork oil capacity is 638cc per leg 10w