Mine uses air....
For a 1985 Yamaha 700 Maxim, the fork oil capacity is typically around 10.5 ounces (approximately 310 ml) per fork. It's important to check the service manual for your specific model and year, as there may be slight variations. Additionally, ensure you're using the appropriate viscosity oil, usually around 10W for this type of motorcycle. Always double-check for any specific instructions or recommendations related to your bike's suspension system.
10w fork oil. 130-140 ml from top of fork, when fork is fully compressed without the spring inside the fork.
press on
11.4 u.s. oz. of 10w fork oil in each shock 11.4 u.s. oz. of 10w fork oil in each shock
The 1984 Honda Nighthawk 700 typically uses 10W fork oil. The amount required for a complete fork service is approximately 11.5 ounces (about 340 ml) per fork leg. Always consult the owner's manual or a service manual for specific details and recommendations based on your maintenance needs.
There is a motor in between your legs!
The fork oil capacity for a 1984 Honda Magna 700 is approximately 10.6 ounces (or about 315 milliliters) per fork. It's important to use the recommended oil type, typically 10W fork oil, for optimal performance. Always check the owner's manual or service manual for specific maintenance guidelines.
$400 to $700 for a front tooth and $600 to $900 for a molar-or-$650 to $990 for a front tooth and $850 to $1700 for molar
$600-700 for new rotors and pads, front and rear.
Depending on the vehicle, a complete rebuild will be anywhere from 300 to 700 dollars.
700 pounds is equivalent to 700 pounds.
I was quoted $900+ on the front struts for my '99 pathfinder. On ebay they said they found some for $200 less, but that's still $700+ just for front struts.