For this bike, the front forks will hold 170cc or 5.8oz.
The front fork oil capacity of the Honda CB160 is approximately 150 ml per fork leg. It's essential to use the recommended type and viscosity of fork oil to ensure optimal performance and handling. Always refer to the owner's manual for specific maintenance guidelines and recommendations.
what is the fork level height for a 1995 CR 125 honda
110MM air gap from top of fork leg fully compressed with the springs out
Manual says 5.4oz
210 cc or 7.1 oz
for model 1996-2004 the oil capacity per fork is 477cc, or 82mm from the top of the fork tube when fully compressed (no spring inside)
449cc in each fork. You can also follow the general rule of filling up until there are 10 cm from the top of the fork to the upper oil level in each fork.
From my under standing if your riding MOTO, with a fork oil level gauge you measure put 110 mm.
The V65 Magna takes 580cc in the left fork and 565cc in the right fork, according to the manual. The difference in volume is related to the anti-dive modulator on the left fork. Left and right references are as you sit on the bike.
The fork oil level for a 1980 Honda Goldwing is typically around 5.3 inches (135 mm) from the top of the fork tube when fully compressed. It's important to ensure the forks are fully compressed and the springs are removed when measuring. Always refer to the specific service manual for your model to confirm the correct specifications and any variations.
This bike, which was also known as the Honda Hawk, has front forks that will hold 150 ml of fork oil for each fork.
The fork oil capacity of a Honda S90 is approximately 190 ml (6.4 oz) per fork leg. It's important to ensure that the forks are properly serviced and filled to this level for optimal performance. Always refer to the owner's manual or service guide for specific maintenance recommendations.