0
There are four ways to find a ratio.
1 A dealer can normally tell from the vin number.
2 There are normally tags or labels on the axle that have part number, gear ratio, and fluid requirement
info.
3 You can count how many times you have to turn the driveshaft to get one complete turn of the tires.
4 You can divide the number of teeth on the ring gear and divide by number of teeth on the pinion.
What else can I help you with?
What gear ratio should you run with a 350 transmission and a 350 engine in an 84 c1500 truck?
3.90
What is the stock gear ratio for a 1973 Oldsmobile Cutlass Supreme with a 350?
323
Gear ratio of a Ford 350 dump truck?
Probably either 4.33 or 4.56.
What is the top speed of a 1971 nova with a 350 engine?
It should bury the speedometer depending on the gear ratio.
Why does your 1990 350 Fuel injected full size Blazer stall when you put it in gear?
sounds like your torque converter is faulty in your transmission
What are common rear end gear ratios for 1987 Chevy suburban with 350?
most common ratio is 373
What rear end gear ratio is recommended with 1970 Chevy 350 with 350 turbo in 1965 Chevy c-10 long box?
3.08 makes a good ratio for economy. 3.55 for more power when towing.
What gear ratio well give me the best MPG with a 350 CI and 350 turbo trans showing 2000 rpm at 55 mph?
Probably about 2.73-1.
Will a turbo 350 be better on hwy than a powerglide?
Wouldn't matter on the highway. The high gear ratio is 1:1 on both. The 350 has a lower first gear, which would be better for getting started. Especially in a heavy vehicle.
Gear ratio for turbo 350 trans?
1st- 2.52:1 2nd- 1.52:1 3rd-1:1
What gear ratio is in a stock 1996 silverado 1500?
i have a 92 silverado 1500. put 410 gear in and took out stock 308 gear. yours is probaly the same if you have 350 engine and 700 trans.
What mean 350 ratio?
If you're talking about rear end gear ratio, it means there's one complete turn of the axle shafts for every 3.5 turns of the driveshaft.
