It indicates a fault between the key and the immobiliser.
Usually a faulty key.
how
To remove a key that is stuck in the ignition on a Peugeot 406 HDI, make sure that the car is in park. Then try to remove the key. If this does not work, spray the ignition mechanism with WD-40 after pulling out the key as far as possible. Then work the key in and out until it comes out.
Refers to the battery in the car key! So it means you will need a new battery in the electronic key.
Insert key and turn to unlock or press unlock on the key fob if available. Press the button surrounding the key hole and the boot should open.
there is one unit attactch to the key barrel and plugs into the com 2000 unit (back of wiper /indicator arm )
The green key symbol, on your Honda Civic, is a reference that all systems have been checked and are functioning properly. The symbol should only stay illuminated for 30 seconds.
check your insurance policy you might be covered for loss of keys if so let them deal with it use the vin number situated on the dashboard take that to a peugeot dealership and the should make you a key up that day.easy
That symbol is the engine immobiliser. You cannot start the car without a GENUINE Skoda Fabia key.
The padlock symbol on the dashboard of a 2005 Ford Fiesta indicates that the vehicle's immobilizer system is activated. This security feature prevents the engine from starting without the correct key or fob. If the symbol is illuminated, it may suggest an issue with the key recognition, such as a faulty key or a malfunctioning immobilizer system. If the problem persists, it's advisable to consult the vehicle's manual or a professional mechanic.
security if it stays lit and your car doesnt start you need to see your dealer for programming
To change the ignition barrel on a Peugeot 406, first, disconnect the car battery to ensure safety. Remove the steering column covers by taking out the screws and carefully prying them apart. Then, insert the key into the ignition, turn it to the "ON" position, and press the release pin on the barrel to pull it out. Finally, install the new barrel by reversing the process, ensuring it locks into place securely before reassembling the steering column.
Step harder on break