It's takes 7 gallons or 28 quarts. The 4300 is the biggest and the filter alone holds 4 quarts (you must fill the filter with new oil to prime it.) Two 5 gallon buckets help with the extraction/recycling of old oil.
If I remember correctly, I believe oil capacity is 32 qts.
The oil capacity for International 4300 dt466 from 1994 to current hold 30 quarts with filter. Those made before 1994 have smaller engines with the capacity to hold less oil.
The oil capacity is 30 quarts or 7.5 gallons.
The oil capacity for a 2007 International 4300 equipped with a DT 466 engine is approximately 10 quarts (or about 9.5 liters) with a filter change. It’s essential to check the owner's manual or maintenance guide for specific details, as capacities may vary slightly based on configurations or additional equipment. Always confirm with the manufacturer's specifications for the most accurate information.
8 gallons
Well, honey, the oil capacity for a 1991 International 4700 DT 466 is approximately 30 quarts. Make sure you check your dipstick and add oil gradually to avoid overfilling. And for heaven's sake, don't forget to change your oil filter too!
No, it is an International engine.
The oil capacity for an International 4700 with a DT 466 engine is typically around 9 quarts (approximately 8.5 liters) when using a standard oil filter. It's important to consult the owner's manual or specific service documentation for the exact specifications, as capacities may vary slightly based on engine configurations and revisions.
34 quarts
The oil system on all DTs from '94 to current holds 30 Qts (nominal) including the filter. Some engines do have smaller capacity oil pans, but they are front-sump type pans (4x4 applications I think).
14% of 466 = 14% * 466 = 0.14 * 466 = 65.24
The International Harvester (IH) DT 466 engine typically holds around 10 to 12 quarts (approximately 9.5 to 11.4 liters) of coolant, depending on the specific model and configuration. It's essential to consult the engine's service manual for the exact capacity and any additional recommendations for your application. Always ensure the cooling system is properly filled and maintained for optimal performance.