75W-90 synthetic gear oil
To replace the front differential bearing on a 2005 K1500, first, lift and securely support the vehicle. Remove the front driveshaft, differential cover, and drain the fluid. Next, remove the differential carrier by unbolting it from the housing, then replace the old bearings with new ones using a bearing puller and press for proper installation. Finally, reassemble the differential, refill it with fluid, and reinstall the driveshaft before lowering the vehicle.
6.5" front and rear door speakers
to change brakes on a 2005 trailblazer do i need a star bit to remove cailber pins
To check the front differential fluid level on a 2005 Ford Explorer, first, ensure the vehicle is on a level surface and safely supported. Locate the front differential, which is typically found near the front axle. Remove the fill plug, usually located on the side of the differential housing, and check if the fluid is level with the bottom of the plug hole; if it drips out, the level is sufficient. If not, you will need to add the appropriate differential fluid until it reaches that level.
person with seatbelt and a circle in front That is the airbag system warning light.
The coolant temperature sensor, on a 2005 Chevrolet trailblazer 4.2 liter engine, is located just above the thermostat housing. The thermostat housing is located in the front of the engine.
The 2005 Trailblazer has a 22 gallon tank.
do a 2005 trailblazer come with a carentry control
how to adjust the seat memory on a 2005 trailblazer
$600-700 for new rotors and pads, front and rear.
chances are they are in the gas tank, but it may be right in front of or laying against it somewhere.
The EXT is longer and has a 3rd row