9mm or .036 inch
spark plug gap for polaris 425
It is 0.028 in.
The spark plug gap for a Polaris Indy 500 should be set between .025 and .028 inches. A new spark plug should need no adjustments as they come preset from the factory.
.028
.028
To replace the spark plug on a 2004 Polaris Sportsman 700, first, ensure the engine is cool and disconnect the spark plug wire. Use a socket wrench to remove the old spark plug by turning it counterclockwise. Before installing the new spark plug, check the gap and adjust if necessary. Finally, insert the new spark plug, tighten it securely, and reconnect the spark plug wire.
To remove the spark plug on a Polaris Sportsman 400, first ensure the engine is cool and the ignition is off. Locate the spark plug, which is typically found on the side of the engine, and disconnect the spark plug wire. Use a spark plug socket and ratchet to unscrew the spark plug by turning it counterclockwise. Once removed, inspect or replace as needed, and then reassemble by reversing the steps.
where are the spark plugs located on the Polaris Magnum 325 ATV? Where is the fuel filter located?
BKR6E plug with 0.035 gap.
0.070
.028
its inside the exhaust