.025
how to replace plug wire on a toro mower
Champion RJ18Y
.030
Tecumseh Part #611049 - Champion Spark Plug #RCJ8Y
How easy is it to replace a spark plug wire on a gas weed eater?
To perform a weed eater spark plug replacement, first ensure the engine is cool. Locate the spark plug on the engine and use a spark plug wrench to remove it. Check the gap on the new spark plug and adjust if necessary. Install the new spark plug by hand, then tighten it with the wrench. Finally, reconnect the spark plug wire and test the weed eater to ensure it is running smoothly.
Champion RJ19LM will work.
Get a spark plug socket and wrench that fits the plug body and remove it by turning counter-clockwise.
The correct plug gap for my Toro GTS 6.5 horse mower is 0.035
Autolite 458
Your weed eater spark plug may not be firing due to issues such as a dirty or faulty spark plug, a disconnected or damaged spark plug wire, or a problem with the ignition system. It is important to check and replace the spark plug if needed, ensure the spark plug wire is connected properly, and troubleshoot the ignition system to resolve the issue.
The spark-plug gap for a toro 6.5 hp self paced walk behind lawnmower is a 0.035 spark plug. You can easily find nice spark-plugs for sale on sites such as eBay.