answersLogoWhite

0

.045

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

Spark plug gap for 1975 Chevy Chevelle 400 small block?

that should have the HEI distributor so the plugs should be set at .045


What is the proper spark plug gap for a Chevy 400 small block bored out to a 406?

.035 or you can go .045 depends on the engine setup but .045 is a safe gap.


What is the spark plug gap on a Yamaha kodiak?

The spark plug gap on a 2000 Kodiak 400 is .024


How do you change the spark plug on a 2004 suzuki eiger 400?

To change the spark plug on a 2004 Suzuki Eiger 400, first, ensure the engine is cool and disconnect the negative battery cable. Remove the spark plug cap and use a spark plug socket to unscrew the old spark plug. Before installing the new spark plug, check the gap and adjust it if necessary. Finally, screw in the new spark plug, reconnect the spark plug cap, and reattach the battery cable.


What is the correct spark plug for the Yamaha seca 400 motorcycle?

The correct spark plug for this motorcycle is: NGK D8EA


How do I change the spark plug in my Honda 400 XR?

To change the spark plug in your Honda 400 XR, first ensure the engine is cool and disconnect the spark plug wire. Use a socket wrench to remove the old spark plug by turning it counterclockwise. Inspect the new spark plug and gap it to the manufacturer's specifications if necessary, then install it by threading it in clockwise and tightening it securely. Finally, reconnect the spark plug wire, and your spark plug replacement is complete.


Why does spark plug keep fouling on Kodiak 400 ATV?

it could be a bad spark plug wire or the plug could be gapped to much


What is the cylinder bore on a 400 small block?

a 400 small block Chevy has a 4.125" bore.


How do you remove spark plug on a polaris sportsman 400?

To remove the spark plug on a Polaris Sportsman 400, first ensure the engine is cool and the ignition is off. Locate the spark plug, which is typically found on the side of the engine, and disconnect the spark plug wire. Use a spark plug socket and ratchet to unscrew the spark plug by turning it counterclockwise. Once removed, inspect or replace as needed, and then reassemble by reversing the steps.


What is the spark plug gap for a Yamaha big bear 400?

The spark plug gap for a Yamaha Big Bear 400 should be set at .024 inches. A new spark plug may be purchased at an auto parts store with the gap preset.


What is the spark plug gap for a polaris 400 scrambler?

.028


What is the spark plug gap on a polaris 400 ATV?

.028