( .054 inch ) spark plug gap for your 4.0 liter EFI , V6
( confirm with the VECI sticker in your engine compartment )
Vehicle Emission Control Information sticker is at the front on top of the frame for the radiator
.054 inch ( .052 to .056 inch )
On a 1996 Ford Explorer , 4.0 liter V6 engine : The spark plugs are installed in the engine cylinder heads ( you can see where the spark plug wires connect to the spark plugs ) firewall #3 - #6 #2 - #5 #1 - #4 front of vehicle
The spark plugs are threaded into the cylinder heads ( there are spark plug wires from the coil ( or 2 coils in the case of the 5.0 liter V8 ) going to each spark plug On the 4.0 liter V6 engine : firewall 3 - 6 2 - 5 1 - 4 front of 1996 Ford Explorer On the 5.0 liter V8 engine : firewall 4 - 8 3 - 7 2 - 6 1 - 5 front of 1996 Ford Explorer
The 1996 GMC Sierra six-cylinder spark plug gap, is .009. Most spark plugs are pre-gapped by the spark plug manufacturer.
Where can you find a picture of motor for changing spark plug wires on a 1996 V8 ford explorer?
four, as it is a four cylinder engine with one spark plug per cylinder.
.054 inch
www.motorcraft.com shows the spark plug gap for a 1996 F 150 4.9 L 6 cylinder as .044 inch
gap
THE GAP SHOULD BE SET AT .054".
On a 1996 Ford Explorer : Yes , the 5.0 liter ( 302 cubic inch ) V8 engine has ( 8 spark plug wires ) with ( 2 ignition coil packs )
Inside the manual transmission bellhousing