The firing order is 1-4-2-5-3-6
==============================================================
The engine cylinder / spark plug locations are numbered :
firewall
3 - 6
2 - 5
1 - 4
front
============================================================
The coil pack towers are numbered :
coil---3---4
pack--2---6
plug---1---5
== ==
on a toyota corolla 1995 with a 1.6 or 1.8 liter the spark wire layout is 1342
The spark plugs on a Ford Explorer are replaced by first disconnecting the battery. Remove the spark plug using a spark plug socket. Replace with the factory recommended spark plug.
The spark plug gap for a 1998 Ford Explorer (V6 and V8 engines) is .054"
spark module is bad
Make sure you are using Ford OEM (Motorcraft is not always OEM) Spark Plugs that are designed for you explorer.
The only engine offered in a 1994 Ford Explorer was the 4.0 liter OHV / pushrod V6 ( the 8th " character " of the VIN is an ' X " ) ---------------------------------------------------------------------------------- The engine cylinder / spark plug locations are numbered : firewall 3 - 6 2 - 5 1 - 4 front of Ford Explorer ( V6 ) --------------------------------------------------------------------------------------------- The coil pack towers are numbered : coil---3 - 4 pack--2 - 6 plug---1 - 5
Yes, follow the wires from the spark box and you will find out where the spark plugs are.
.054
Screwed into the heads.
Obviously- the spark plugs were not the issue :)
Correct sparkplug is Champion RN14YC