.0229
The thickness of a 22 gauge metal sheet is approximately 0.0253 inches or 0.645 millimeters. In the context of different materials, such as steel or aluminum, the exact thickness can vary slightly due to the different standards used for measuring gauge. Generally, 22 gauge is commonly used in applications like HVAC and manufacturing.
Auto sheet metal is commonly manufactured in gauges ranging from 18 to 22, with 18 gauge being thicker and 22 gauge being thinner. The most commonly used gauge for auto body panels is 20 gauge.
With a micrometer. Usually in terms of gauge, 22 ga steel is .0299 in thick, the actual thickness for different materials varies aluminum of the same gauge is somewhat thinner than steel, galvanized steel is a little thicker than plain steel of the same gauge. A micrometer is one way to measure it, there are gauge plates that have slots for each size.
Sheet metal used on older car bodies typically ranges from a gauge of 16 to 18. Sheet metal used on the auto body of new vehicles and when aftermarket body work is performed tends to be between 20 and 22 gauge.
It depends on what you are attaching to the sheet metal. Are you screwing together two layers of sheet metal? Or are you attaching a wooden block, for example, to the sheet metal? metal frame to the sheet metal
GAUGE IS THICKNESS THE SMALLER THE # THE THICKER 2- THICK 22- THIN
really thick really thick! That's a really thick answer. What people need to know is that 22 refers to Standard sheet and Wire Gauge. See: http://www.mig-welding.co.uk/forum/showthread.php?t=4143 Far from being thick it is rather thin especially if you want to weld it. It is 0.7mm
The thickness of the sheet metal used to fabricate a sink is called its gauge. The gauge of sheet metal for most sinks ranges from 22 -15 gauge. The lower the gauge number, the thicker the sheet metal is. High quality residential sinks range from 18-16 gauge while commercial quality sinks are offered in 15-16 gauge. When manufactures refer to the gauge of their product, they are referring to the thickness of the sheet metal before the manufacturing process begins. Most stainless steel sinks are manufactured using a process called deep draw forming where a sheet of metal is drawn down into a form through a series of steps called reductions. Each reduction stretches the sheet metal deeper and deeper into the form, so what started out as an 18 gauge sheet of metal will not end up being 18 gauge throughout the entire finished product. The industry standard is to state the gauge of the metal that the manufacturing process started with. Since this is the standard practice, it makes it easy to compare one sink to another. Not all sinks are made using deep draw forming, zero radius sinks are manufactured using a process called press brake forming where the sheet metal is bent into the main sink shape under tremendous pressure by a machine. The sides are then added and welded to the main assembly, forming a box shaped sink basin. Zero radius sinks are identifiable by their flat sides and unique 90 degree or near 90 degree corners. Since these sinks are bent into shape instead of drawn, they retain a more uniform thickness throughout the finished product. Whether you decide to purchase a deep drawn sink or one manufactured through press brake forming, make sure to identify which gauge of steel the manufacture used during the forming process, it is one of the most crucial factors when considering a sink investment. Remember, the lower the gauge number the thicker the metal and as a general rule of thumb, an 18 gauge or lower sink is considered a high quality gauge. Give yourself enough time during your project to make an educated decision; it will be well worth the time investment.
12 gauge is thicker than 14 gauge.
22 gauge (22 ga) steel has a thickness of approximately 0.030 inches or 0.76 millimeters. In the context of other materials, such as wire, 22 gauge may vary slightly in thickness, but it generally falls within a similar range. This gauge is commonly used in various applications, including metalworking and crafting.
The difference between 18 gauge and 22 gauge stainless steel is the thickness. The 18 gauge is 0.050" thick, and the 22 gauge is 0.031" thick. A link is provided below to an article with a list of the conversions. You'll note that the cited thickness for the gauges of stainless do not apply to galvanized steel, aluminum, zinc, brass or other metals.
Due to steel fabrication being a primarily hands-on, online instruction is rare. However, see http://www.sheetmetalworld.com/sheet-metal-news/fabrication-tutorials/22-sheet-metal-tutorials for 22 tutorials on sheet metal work.