The torque setting for a sump plug bolt can vary depending on the specific vehicle and engine type. Generally, it ranges from 20 to 30 Nm (Newton-meters) for most cars. Always consult the vehicle's owner manual or a service manual for the exact specifications to ensure proper installation and avoid damage.
The torque setting for the sump plug bolt on a Peugeot 106 1.1 petrol (2000 W reg) is typically around 20 Nm (15 lb-ft). It's important to ensure the bolt is tightened properly to prevent leaks without overtightening, which can damage the threads. Always consult the vehicle's service manual for the most accurate specifications.
The torque setting for a Ford Fiesta 1300 sump plug is typically around 25 Nm (18 lb-ft). It's important to use a torque wrench for accuracy and to avoid over-tightening, which can damage the oil pan. Always refer to the vehicle’s service manual for the most accurate specifications.
What is the sump bolt torque on a Toyota Town-ace van 2y 1800 motor
17mm bolt and nut
on the bottom of the sump, i think it is a 19mm hex bolt, it does not look like a sump plug it looks like a mounting bolt for the engine but if you can get the car high enough and get good light in you will see it o.k.
on a corsa life , 53 plate , its a T40 torque drive.
The oil sump plug for a 2004 model 240LE is typically located on the bottom of the oil pan, which is situated beneath the engine. To access it, you may need to raise the vehicle and ensure it is securely supported. The plug is usually a threaded bolt that can be removed with a socket or wrench. Always remember to check your vehicle's manual for specific details and torque specifications.
The sump drain plug on a Citroen C5 2.2 HDi is located on the underside of the engine oil sump, typically towards the rear of the vehicle. It can be identified as a hexagonal bolt that requires a suitable socket or wrench for removal. To access it easily, you may need to lift the vehicle and ensure it's securely supported. Always consult the vehicle's manual for specific details and torque specifications when replacing the drain plug.
I know it doesn't seem a lot but 20NM
The sump plug on a Renault Kangoo is typically located at the bottom of the engine oil sump, which is usually situated under the vehicle. To access it, you may need to lift the vehicle using a jack and secure it with stands for safety. The sump plug is usually a hexagonal bolt that can be removed with a wrench to drain the oil. Always ensure to have a catch pan ready to collect the old oil when removing the plug.
The sump plug on a Citroën Xsara Picasso is located at the bottom of the engine oil sump, typically on the underside of the vehicle. To access it, you may need to raise the car securely on jack stands. The plug is usually a hex or square bolt, which can be unscrewed to drain the engine oil during an oil change. Always ensure the engine is cool and properly supported before attempting to access the sump plug.
On 1998 year ,The sump plug is on the bottom of sump at the rear right.