Apparently, it is about 100 PSI for radial tires commonly on the road now.
A tire pressure gauge is used to measure the air pressure inside a tire by pressing a nozzle onto the valve stem of the tire, providing a reading of the pressure level on a display. This helps ensure that the tire pressure is at the recommended level for safe driving and optimal tire performance.
The recommended method for accurately measuring tire pressure is to use a tire pressure gauge. This tool is inserted into the tire's valve stem to provide an accurate reading of the air pressure inside the tire. It is important to check tire pressure regularly and adjust as needed to ensure safe driving conditions and optimal tire performance.
No lower than 60 psi
A tire gauge works by using a pressure sensor to measure the air pressure inside a tire. When the gauge is pressed onto the tire valve, it detects the pressure and displays the reading on a dial or digital screen. This allows the user to know if the tire has the correct amount of air pressure for safe driving.
Different tires have different tire pressures. Look on your tires, there will be a maximum load pressure reading on the tire. Usually 5 psi than maximum is a good average pressure.
low tire pressure
To use a tire gauge effectively for checking tire pressure, first remove the valve cap from the tire. Press the gauge firmly onto the valve stem and wait for the reading to stabilize. Compare the reading on the gauge to the recommended tire pressure in the owner's manual or on the sticker inside the driver's side door jamb. Add or release air as needed to reach the correct pressure. Replace the valve cap when finished.
42 rear 36 front cold tire reading
Tire pressure gauges are simple to use. Just take the valve stem off the tire and insert the gauge end into the stem fully. You will then get your accurate tire pressure reading. Just replace the valve stem and you're done.
Yes. The light means that one of the tires is not reading correctly. Either from improper pressure or a sensor problem.
To check tire pressure with a gauge, first remove the valve cap from the tire. Press the gauge onto the valve stem firmly to get a reading. Compare the reading to the recommended pressure in the owner's manual or on a sticker inside the driver's side door jamb. Add or release air as needed to reach the correct pressure. Replace the valve cap when finished.
Just like any other tire, put the guage on the valve step and look at the pressiure reading