Probably the clutch is not disengaging. This could be due to the clutch cable being out of adjustment, or the clutch master cylinder not having enough fluid, the clutch slave cylinder being worn out, or the throw out bearing being shot. Try to have a mechanic look at it.
you cant adjust a drive belt, you problem is in the secondary clutch, I am sure you need to replace the sliding clutch and put a spacer in front of the hub.
you cant it is a hydrolic clutch
Clutch needs adjusting, or synchro going out
You need a new clutch
You cant it is a hydraulic clutch
I had this problem. For me the pressure plate was sticking and broke the linkage. Take it to the dealer for replacement.
If we are talking about a standard shift transmission, the clutch may be out of adjustment or if it is hydraulic operated, out of hydraulic fluid because of a leak.
Right above the clutch is a white button push it with the key on and the light will "blink" out the code. My problem is I cant find out what my code means.
cant its hydraulic if the clutch slips its time for a new 1
Answer: You can eliminate much of your overheating by having the clutch adjusted properly. you cant
In a car-usually clutch is shot
under the car ... near the clutch housing .... you cant miss it