answersLogoWhite

0

What else can I help you with?

Related Questions

Can a 350 watt amp power 2 12s?

It depends on the power and impedance rating of the 12-inch speakers. If both speakers are rated for 175 watts and the amp can handle the impedance of the speakers, then the 350 watt amp should be able to power both speakers effectively.


What kind of amp do you need if you have 2 12 inch subwoofers that have an rms rating of 250 watts each?

To power your speakers, and to ensure that your amp has enough power to power your subwoofers, you would need at least an amp of 750 watts true power.


How do you connect your speakers to your aftermarket amp in a jeep charokee amp?

The RCA's from the amp will be arn to the CD player, then you need to connect the speaker's wire to the output + and - of the amp, this will cause the amp to have musical power from your radio, and the speakers to have the power from the amp..-Shocker


If i brought 2x400 6x9 speakers from ground zero what power amp and sub would you recommend?

Ground zero should be able to advise you on a power amp and sub.


Should you have an amp with these speakers JL Audio C2-525x or will your HU power them properly?

If its a good after market headunit it should be ok, but an amp will always be the best idea.


Can you power 2 door speakers on a mono amp?

A mono amp will not sound good with door speakers. There are to be used with subwoofers


What is 6ohm in amps?

Ohms is a measurement of resistance between the amp and speakers. Most home audio is 8 ohm, if you run 4 or 6 ohm speakers you cut resistance down and get more power out of the amp. Say your stereo is 100X2 @ 8ohm, if you use 4 ohm speakers you should get 50% more power BUT the amp is working twice as hard and can burn up.


Can home speakers be powered by car amplifiers?

Technically, yes. Any speaker can be hooked up to a car amp. Be careful though, car speakers aren't rated for that kind of power normally.


Does fuse power door speakers on Mitsubishi eclipse 1998?

No. The radio or amp would be fused, but not the speakers.


What should I know before purchasing a new car amp?

Definitely make sure that the speakers you plan for the amplifier to power are strong enough to handle the amp. That means their wattage should meet or exceed that of the amp. Otherwise, the amp will blow your speakers. Also, it's good practice to use bass blockers on the front speakers. These are very inexpensive, and allow you to hear the high- and mid- frequency signals with more clarity while all the "boom" is in the back.


When hooking up an amp and speakers do you wire the speakers through the stereo or the amp?

Hook your speakers up to the amp.


Can you power speakers with a subwoofer amp?

No that would neither be a good Idea or possible