You need to instal the same size and amp rating as you removed.
You need to instal the same size and amp rating as you removed.
the same as what came out
In a 2009 Chrysler 300, the cigarette lighter fuse is located in the fuse box under the dashboard on the driver's side. To access it, you need to remove the cover of the fuse box and look for the fuse labeled "CIG" or "Power Outlet." If the fuse is blown, replace it with a new one of the same amperage. Always consult the owner’s manual for specific fuse locations and ratings.
If the window in your 1990 Chrysler New Yorker won't go down, it could be due to a faulty window motor, a blown fuse, or a problem with the window switch. First, check the fuse associated with the power windows to ensure it's not blown. If the fuse is fine, test the window switch and inspect the wiring for any damage. If these components are functional, the window motor may need to be replaced.
Blown fuse or the lights are just blown and need replacing.
Only if the fuse protects the circuit that the wipers are on. If replacing the fuse does not solve the problem, check the replacement fuse; if it has also blown then you have a short circuit on that circuit and need to consult an auto electrician
In a 2012 Chrysler 300, the cigarette lighter fuse is typically located in the fuse box under the dashboard on the driver's side. The specific fuse number for the cigarette lighter is usually #13, but it's always a good idea to check the fuse box cover for the exact details. To access the fuse box, you may need to remove a cover panel beneath the steering wheel. If the fuse is blown, replacing it should restore power to the cigarette lighter.
It could be either. Check the fuse first, if it is OK then you need to replace the bulb but if the fuse has blown you need to find what has caused it to blow.
If your wipers do not work at all. It could be a fuse or it could be the motor. Check your fuse and if its not that, then you need to get a new motor.
look for a blown fuse.
You can easily replace it but you need to know why it blew in the first place. All fuses are marked on the fuse box or in the drivers manual as to which circuit they protect. Determine which circuit that blown fuse protects and inspect that circuit for troubles.
the amp wont work.Check the power fuse first.If this is ok, there is generally another fuse inside the amp that will need checking
it should be in your owners manual